1156

Hi
Well i have had some bad luck with pullstarts recently, firstly about 2 weeks ago, i melted(yes melted) the string on my kyosho fazer pullstart, and yes im sure, however the coil and the surrounding is fine, now my lhs told me they dont stock string only for pullstarts and its extremely hard to do, which is why they dont, however a new pullstart was $50nzd, which i dont really want to justify right now, because i hardly use the fazer except for the occasional quick run when my firestorm isnt working. And after the motor got to such a temperature that it was hot enough melt the pullstart string i figured the condition of the rest of the motor is questionable, not to mention the cars age and it has had countless litres through it. Rather get a new motor if anything

Anyway i left that, but yesterday my firestorm pull start string also snapped(frayed through) so now i have 2 cars without pullstarts in working order

So my question is where can i get the pullstart string i need? Just how hard is it? I mean the hobby shop is quite probably just talking it up to make me buy a new pullstart
is there a specific diameter it needs to be or anything? please dont link me to a US site because i am in new zealand

Would this be suitable? Its the only one i could find on ebay that ships to NZ
http://cgi.ebay.com/Dynamite-String-...item5d297adbda

alternatively is there a substitute that is suitable for it? like a certain type of rope i might be able to source here?

Thanks in advanced for any help

Argess

I've heard that venetian blind cord works great. Be careful you don't get caught cutting some off !

proanti1

My Feedback: (2)

NO. Go to a sporting goods store and pick up some 80-100lb test Dacron braided line. It will literally last forever.

Argess

NO.....use the venetian line cord

LOLOL......being an argumentative type

or maybe this will work:

http://www3.towerhobbies.com/cgi-bin...?&I=LXUP93&P=7

but whatever you do, dont go to a sporting goods store.....hehehehehe

worstluck

ive used the string from venetian blinds, a g string from a guitar (acoustic light gauge), and picture hanging wire. ive pondered using some sort of fishing line too. but now i just bump start.

SyCo_VeNoM

As for replacing it its kind of a headache re-winding pull starts. I've repaired 3 pull starts and its probably the biggest headache on a RC to fix.

You can find guides on re-winding pull starts its not that hard just it takes alot of patience. Think it took me 20-30 mins last time I had to do one. Only advise I will give is do it slow and steady.

HPI_Savage_RC

Venetian blind cords are much tougher than standard pullstart strings and work well.

1156

Thanks, well i have ordered that one on ebay designed for it, but shipping will take ages, so i will try out your guys alternatives now, and will just put the ones i ordered in a draw incase i need them

Thanks for the help guys

johndavis

ive used spider wire fishing line it worked great