ddennison

My Feedback: (15)

Hi guys,

I have some habu fixing to do. Had some form of a lockout and now have to change to a new fuse.

Anyone know exactly what the white silicone glue is that they use? Is it anything special (brand/type)or is any silicone fine?

Thanks
Dave

bcovish

My Feedback: (8)

Have you considered using a hot glue gun? I have used it with very good results.

rcpete2

hot glue gun,perfect.

BaldEagel

Standard Cyno works as well.

Mike

KFX450

My Feedback: (30)

I dont think anyone knows what kind of glue that is!!!!..If someone does..I would love to know..

NICLAS

Try UHU Por it´s for the use of that kind of foam.

Wclays

My Feedback: (85)

I have had great success using the Gorilla white glue

http://www.gorillaglue.com/glues/fastcure/index.aspx

It has not been on the habu but has worked on everthing else.

BaldEagel

As far as I can see its a silicon mastic, but being an Elepor closed cell structure type of foam anything will work on it that stays in place long enough or sets quickly enough whilst the two surfaces are held together, the trouble with CA is its rigid and the flex in the foam will eventually crack the glue joint, but OK for quick repairs, a flexable glue like UHU Por or silicon mastic will work very well and stay in contact with each surface even whilst flexing.

Mike