Welcome Wren Turbines USA
#26
Member
Join Date: Oct 2012
Location: Torquay, UNITED KINGDOM
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I am pleased to announce that WREN TURBINES USA has now got a NEW website. Do please come along and take it for a test-drive!
www.wrenturbinesusa.net
Best regards, Ron Ballard, Wren Turbines USA.
www.wrenturbinesusa.net
Best regards, Ron Ballard, Wren Turbines USA.
Last edited by jetmanuk; 12-18-2013 at 09:42 AM.
#27
![Default](images/icons/icon1.gif)
Ron will give proper advice but in the meantime,
Jeremy the first thing to check is to make sure you didn't plug in the solenoids backwards. Probably ok
make sure your turbine Lipo is fully charged.
Then flush out out your fuel system backwards and make sure it has no trash in it. See that often too. Even on experienced guys.
Then take out the festo inline filter. Filters on the suction side don't work very well. The motor has a pressure side filter under the cover. The. Remove all the zip ties on your fuel suction feed lines. You likely have a restriction someplace. That would be where I would start for what it's worth.
Jeremy the first thing to check is to make sure you didn't plug in the solenoids backwards. Probably ok
make sure your turbine Lipo is fully charged.
Then flush out out your fuel system backwards and make sure it has no trash in it. See that often too. Even on experienced guys.
Then take out the festo inline filter. Filters on the suction side don't work very well. The motor has a pressure side filter under the cover. The. Remove all the zip ties on your fuel suction feed lines. You likely have a restriction someplace. That would be where I would start for what it's worth.
www.wrenturbinesusa.net
Thank you
Goose..
Last edited by gooseF22; 12-18-2013 at 10:27 AM.