SyCo_VeNoM

Wow the Jammin x1 crt still rips ran it for 15ish minutes till the motor somehow backed away from the center diff. I will have to loosen the motor up, and move closer a little later as I couldn't move it at all with my hand. Honestly I thought it stripped the pinion, or spur which are both hardened steel, but nope there is no damage to the teeth at all..
Now with the lower kv motor(200kv lower) I put in it the front tires still turn into pizza cutters, but it now doesn't flip when going full speed.
The only issue with the pizza cutter tires the bumps that act as a jump for the 1/10th vehicles they just drive over it, and the rear tires which don't balloon up slams into launching it up causing it to flip over backwards

But yea it royally ripped through grass that was just as tall as it (the lot next door is empty, and the owner hasn't mowed it in a few months) was with 0 issues doing grass rooster tails behind it(my houses lawn was mulched the other day).
I was a little concerned as it was launching pebbles flying fast as hell all over the place. One hit the fence a few feet from me, and ricochet hitting me I was just wishing I had protective eyewear as I was kind of worried about getting one shot right into my eyes.

SyCo_VeNoM

started converting the pede 4x4 back into a slash 4x4. Gotta figure out what I did to the rear bumper assembly(or buy a ner one), and make a new radio box mount for the radio box I have from the pede as I got no idea what happened to the stock one from the slash(and yes it would fit if the servo was flipped around which won't work). But outside the rear bumper once I make a mounting plate for the other radio box, and tape the esc down it can be ran as the rest is together..

Reason I'm doing this is the pede 4x4 was set up more as a truggy with a center diff, but did everything a truggy can do worse then a truggy, and I have my jammin x1 crt which smokes it for speed, handling, and ground clearance.
Taking the jammin out yesterday I had way more fun then I did with the pede when I had it out as I was also worrying about it overheating.
I also have the e-mt project once it is finished that fits the 1/10th scale truck itch. I'll probably be using the tires off the pede on it so there is that which solves what tires I'll put on it(I think they will fit will have to check) as the mashers I had are in very bad shape

Edit:
Made the plate to mount the radio box, and ESC. Fits great here is a pic of it installed


I only made had minor problem which I was easily able to just cut down other then that all mounting holes, and points fit perfect. I wish the power switch wire was a bit longer so I could have put the switch in the center by the TRX logo near the front end, but it was just a little too short so I taped it to the servo. Now all I need to do is find the back bumper. I know I saw it a while back I just don't remember where >.>

suburban_hooligan

last weekend i did some Mini Z tuning and attempted to drift it. mixed results. think i need to keep tuning. also need to learn how to drive.

SyCo_VeNoM

Couldn't find the back bumper after looking for it for over a week so I gave up, and ordered one the other day should be here next week. It came with a front bumper too as mine was kinda in real bad shape. I got them quite cheap off a ebay chop shop.

I'll be getting new diff cups for the e-mt1 soon prolly in the next 1-2 weeks to finish that once and for all.
And I'll also be getting around to finishing off my army trucks body soon.

suburban_hooligan

iv just been drifting the Mini Z.
couple weekends ago i did attempt to fix the tightness in the driveline in my Dromida DB. after ripping it completely apart, inspecting everything, testing individual parts, and putting it back together, it's just as bad as it was, idk what the hell is wrong with it.
i need to make another AMain order but keep talking myself out of it.

SyCo_VeNoM

got the new cups finally for the front diff for the eMT build, and the CVD's I bought ages ago, and never used fit in the cups perfectly.
I'll have tot ake it out when I get a bit more free time to test out.
I also had to replace a rear dogbone as it was twisted by almost 90 degrees.

Also I didn't put it the pede 4x4 is back to being a slash 4x4 as it has the new front and rear bumper I ordered a few weeks back.

suburban_hooligan

sense my last post:
put a new wheel pin in my my Savage XS SS
attempted to drift my Mini Z some more
ordered, received, and installed parts for what im calling my "generic stadium truck" build