CA 31% Extra CG Location ?
12-27-2004, 01:52 PM
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Dec 2002
Location: Grandview, MO
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
CA 31% Extra CG Location ?
Well I just wanted to see where those of you who have a Colombo Anderson 31% Extra are balancing out at. According to the instructions is says wingtube is the correct location, is that a good starting point and how sensitive is it ?
Mine is currently going trough final assembly and should be ready in a few weeks. It is powered by Brison 4.8 Twin and all up finished weight should be right at 19.5lbs. Hopefully that will keep the wingloading down and make this a nice 3D flyer. What kind of finished weights has everyone else been comming up with ?
Here is a pic of what it looks like so far.
Scott
Mine is currently going trough final assembly and should be ready in a few weeks. It is powered by Brison 4.8 Twin and all up finished weight should be right at 19.5lbs. Hopefully that will keep the wingloading down and make this a nice 3D flyer. What kind of finished weights has everyone else been comming up with ?
Here is a pic of what it looks like so far.
Scott
