2.15 gas mounting pics
03-22-2005, 08:15 PM
#1
Member
Thread Starter
My Feedback: (3)
Join Date: Feb 2003
Location: Ronceverte,
WV
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
2.15 gas mounting pics
I'm going to be using a 2.15 mvvs on my 80" edge and was wondering if any of you guys that have yours finished could post some close ups of how you handled the ignition module, battery etc. I saw some of the old posts from 2003 but I thought maybe there were some newer ones to show.
Thanks
Bob
Thanks
Bob
03-27-2005, 03:23 AM
#3
Senior Member
My Feedback: (4)
Join Date: Feb 2003
Location: Trenton,
SC
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2.15 gas mounting pics
geebob, I posted all I know a short while back. Here is the thread. Let me know if you need more info or photos.
http://www.rcuniverse.com/forum/m_25..._1/key_/tm.htm
Doug
http://www.rcuniverse.com/forum/m_25..._1/key_/tm.htm
Doug
03-27-2005, 10:18 PM
#4
Member
Thread Starter
My Feedback: (3)
Join Date: Feb 2003
Location: Ronceverte,
WV
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2.15 gas mounting pics
Thanks Guys,
Doug your pics really helped. I think I had actually read the thread before I ordered the kit but didn't find it in my search. I ended up doing my kit a little differently as I finished all the apendages waiting to see what motor I was gonna use on the plane. I just glued up the fuse today and should start laying everything out this week. I found a nice used MVVS 2.15 on ebay and will be using that for this plane. I think I will move my main battery pack a little more forward per your suggestions and use the front hatch for the ignition pack. Hopefully I didn't make too many mistakes and hey if you have a big enough motor just about anything will fly??? I hope :-)
Bob
Doug your pics really helped. I think I had actually read the thread before I ordered the kit but didn't find it in my search. I ended up doing my kit a little differently as I finished all the apendages waiting to see what motor I was gonna use on the plane. I just glued up the fuse today and should start laying everything out this week. I found a nice used MVVS 2.15 on ebay and will be using that for this plane. I think I will move my main battery pack a little more forward per your suggestions and use the front hatch for the ignition pack. Hopefully I didn't make too many mistakes and hey if you have a big enough motor just about anything will fly??? I hope :-)
Bob
