Who else is going to Perry, and what are you taking?
02-07-2003, 03:03 AM
#1
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
Anybody else out there going. Are you just going to look around, sell, buy, or what? What are you taking with you and what do you hope to find?
02-07-2003, 02:13 PM
#3
My Feedback: (309)
Join Date: Jan 2002
Location: Loveland,
CO
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
I'll be there (tables B1 - B7 in main building) with these planes to sell:
36% Aeroworks Edge 540 RTF with your radio system
Pilot 1/3.7 scale Christen Eagle RTC
Wild Wiz 40 RTF
HSRCM Aeron partially built
HSRCM Whazz Up! kit
and a bunch of small miscellaneous stuff also.
Stop by and say hi.
Jim
36% Aeroworks Edge 540 RTF with your radio system
Pilot 1/3.7 scale Christen Eagle RTC
Wild Wiz 40 RTF
HSRCM Aeron partially built
HSRCM Whazz Up! kit
and a bunch of small miscellaneous stuff also.
Stop by and say hi.
Jim
02-07-2003, 02:45 PM
#4
Who else is going to Perry, and what are you taking?
I'll be there but not looking for anything in particular....Always on the lookout for things like gas engines and retracts that are just too good to turn down.
I always enjoy seeing the people I know from the forums too.
I always enjoy seeing the people I know from the forums too.
02-07-2003, 08:39 PM
#7
My Feedback: (60)
Join Date: Jun 2002
Location: Valrico,
FL
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Perry Ga.
I'll be there. I have 4 tables in the main building. table numbers E-16-17 and F-16-17. stop by and say hello
Small stuff for sale and 33% godfrey laser-200, and 2 or 3 other planes I haven't decided on yet.
Frank.
Small stuff for sale and 33% godfrey laser-200, and 2 or 3 other planes I haven't decided on yet.
Frank.
02-08-2003, 02:55 AM
#8
Member
Join Date: Jan 2003
Location: Columbia,
SC
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
IF anyone has an extra table..We waited too long to reserve one. E-mail [email protected] thanx
02-08-2003, 05:10 AM
#9
Who else is going to Perry, and what are you taking?
Looking forward to maybe meeting several of you guys if I can remember where you are....and Jerry, I gaurantee you I'll be by your table!
Jim Hamm, I believe I bought a G-62 from you once. In fact, I'm sure of it.
Mr. Yates, if you're next to Jerry, I'm sure I'll get to meet'cha.
Jim Hamm, I believe I bought a G-62 from you once. In fact, I'm sure of it.
Mr. Yates, if you're next to Jerry, I'm sure I'll get to meet'cha.
02-08-2003, 01:03 PM
#10
My Feedback: (309)
Join Date: Jan 2002
Location: Loveland,
CO
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
Yes Greg,
I remember selling you the G62.
If you can remember tables B1 - B7 in the main building, be sure to say hi and introduce yourself.
Jim
I remember selling you the G62.
If you can remember tables B1 - B7 in the main building, be sure to say hi and introduce yourself.
Jim
02-08-2003, 02:37 PM
#11
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
My club will have a table.
I may bring a plane and an engine I am trying to sell.
I need to understand what the requirements will be!
I may bring a plane and an engine I am trying to sell.
I need to understand what the requirements will be!
02-08-2003, 04:28 PM
#12
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Requirements?
I'm not sure I understand what you mean by requirements. You bring your stuff, set it up, and try to sell it. Most of the regular vendors are set up to take credit cards. For everybody else it's cash and carry. What other requirements do you need to know about? 
02-08-2003, 06:29 PM
#14
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Come on by
I'll be there at the McGill Building, tables E-3 through E-7 trying to sell some of my trash/treasure. Some of you guys come on by and introduce yourselves. I'm looking forward to meeting you.
Nick Jones
Nick Jones
02-09-2003, 07:01 AM
#15
Senior Member
Join Date: Feb 2003
Location: Gray,
GA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
I will be there, but just to look around. I will mainly be looking for a "Gas" airplane. Maybe something around 25%-30% size. I also need a G-38 engine. Hope to see you guys there. I will be there Friday when it opens.
Don Rooks
Don Rooks
02-11-2003, 04:47 AM
#18
Member
My Feedback: (7)
Join Date: Dec 2001
Location: Charleston, SC
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Perry
I'll be there. I can't wait. Our club has two tables and we will be selling some big birds.
Giant Stinger with Mustang 50 and servos
Robinhood 99 completely RTF with Q50 and radio
1/4 H9 Cap 232 airframe
Q35
Super Tiger 2500 with muff.
and other pieces and parts.
I would like to find an AT6 Texan gasser. I've always wanted one of those.
Or any other big fabric cover planes.
Matt
Matt
Giant Stinger with Mustang 50 and servos
Robinhood 99 completely RTF with Q50 and radio
1/4 H9 Cap 232 airframe
Q35
Super Tiger 2500 with muff.
and other pieces and parts.
I would like to find an AT6 Texan gasser. I've always wanted one of those.
Or any other big fabric cover planes.
Matt
Matt
02-11-2003, 02:33 PM
#19
Member
Join Date: Jan 2003
Location: Columbia,
SC
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Perry, Ga
Hey Aerohead:
We're going to Perry, a group from the Jackson Flyers of Columbia, SC. We waited too long to get a table, so we may be outside! I'm taking a n.i.b. Cermark .60 F-20, a small Porterfield ARF n.i.b., a built .061 (Norvel) Shrike, a 25% Fokker DR-1 done up in the Red Barron's next to last color scheme (G-38), n.i.b. G-38, a built-but-never-flown Cox .049 2-channel Cessna 182 (circa 1985, gold stickered).
Give me a yell.
Jetlag (aka Allen M.)
We're going to Perry, a group from the Jackson Flyers of Columbia, SC. We waited too long to get a table, so we may be outside! I'm taking a n.i.b. Cermark .60 F-20, a small Porterfield ARF n.i.b., a built .061 (Norvel) Shrike, a 25% Fokker DR-1 done up in the Red Barron's next to last color scheme (G-38), n.i.b. G-38, a built-but-never-flown Cox .049 2-channel Cessna 182 (circa 1985, gold stickered).
Give me a yell.
Jetlag (aka Allen M.)
02-11-2003, 03:25 PM
#20
Member
My Feedback: (3)
Join Date: Feb 2002
Location: greensboro,
NC
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Perry Swap Meet
I'll be bringing an "in the bones" MW CAP 232. All framed up, ready to cover. I've also got a NIB ST 4500--converted to gas that's already mounted on the Cap, along with a TT spinner. Also got a Global Skyraider warbird (.60 size)---again, all framed up and ready to cover. Also got a Futuba Super 7 radio and a couple of receivers for it. I'd like to sell these and pick up a Ziroli kit---Stuka, Dauntless, etc,... . See you guys there,.....Warped Wing
02-11-2003, 05:03 PM
#21
Junior Member
Join Date: Jul 2002
Location: Columbia S.C.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
perry trip
Hey Aerohead, Hope to get into Perry around lunch time, gonna stay at the Holiday Inn. I'm bringing my 105" Sig Cub with a saito 182 twin. Not sure what the Buddies are bringing as we have'nt loaded the trailer just yet. We still do not have a table as of yet, but maybe someone will cancel or free one up b-4 it's over.
02-14-2003, 04:28 AM
#22
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Hey leverjm
A word to the wise. If you're staying at the H.I., plan on eating someplace else. The food there is expensive, but it is the pits! I used to live in Warner Robins back in the sixties and early seventies when the motel was first built and people used to come from all over to eat there because the food was so good. Not anymore, take my word for it. Whoever the chef was back then either went elsewhere or died. If he is dead, he is rolling over in his grave. :thumbdown
02-14-2003, 04:41 AM
#23
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Let's make a deal.
I'll be there with a Goldberg Extra300 with YS120, Great Planes 120 size Super Sportster with OS120 Surpass, an old Goldberg Anniversary Cub with Saito 65, assorted glow engines, an "in-the-bones" 87" Aeropro Laser, and some assorted small stuff. Will also be looking for a deal on an H9 1/3 Sukhoi. My partner will be selling a very nicely built Byron Sukhoi with a Sachs 4.2 gas engine. I'll be in McGill, tables E3-7. Come on by and intoduce yourselves. Would like to meet some of you guys I've been corresponding with for a few months. See you there.
02-16-2003, 05:58 AM
#24
Senior Member
Join Date: Feb 2003
Location: Gray,
GA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Who else is going to Perry, and what are you taking?
I'll be looking forward to meeting some of you guys. Aerohead, I want to take a look at that Laser you have. Is it bare, or does it have an engine?
02-16-2003, 05:00 PM
#25
Thread Starter
My Feedback: (37)
Join Date: Oct 2002
Location: Dothan, AL
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
rookie8
It does not have an engine mounted. I was going to use a G62, but ended up buying a larger plane before I finished the Laser. The instructions called for a 2.5 through 3.7, but you would want to go with an engine on the upper side of that range. I've heard that the G62 is great on this plane, but a lighter weight engine around 60cc would be nice, too (but more expensive).