savage chassie
#1
Thread Starter
Join Date: Feb 2005
Location: Somewere,
OR
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
savage chassie
hey now im scared i got the savage X lol not realy but i do not like those X cut outs under the motor so im thinking of when the time happens to get eather one of these chassies
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXEVA4&P=Z]stock .25[/link] this one is the 2.5mm thick chassie that has stood up the a butt load of abuse from alot of happy savage owners
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKXB8&P=Z]Integy Alloy Chassis Plate 4mm[/link] and this ones got a difrent design under the motor but its 4mm thick instead of 2.5mm now i know this means it more beefy but has any one ever used this and if so how did u like it its only 10$ more than stock savage .25 chassie but if alot of people liked this one then i will get this one
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKWK1&P=Z]Integy Alloy Chassis Plate[/link] same as above but there 3mm and have a difrent design
my chassie is still ok and i dont REALY bash the savage hard yet i been driveing track and had a few cart wheels but they were light enough that the roll bar saved it. now i just want to know if u were in my shews what u would pick i would pick thicker but the X chassie and the .25 are just the same thickness and its alot about design so tell me whats better
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXEVA4&P=Z]stock .25[/link] this one is the 2.5mm thick chassie that has stood up the a butt load of abuse from alot of happy savage owners
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKXB8&P=Z]Integy Alloy Chassis Plate 4mm[/link] and this ones got a difrent design under the motor but its 4mm thick instead of 2.5mm now i know this means it more beefy but has any one ever used this and if so how did u like it its only 10$ more than stock savage .25 chassie but if alot of people liked this one then i will get this one
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKWK1&P=Z]Integy Alloy Chassis Plate[/link] same as above but there 3mm and have a difrent design
my chassie is still ok and i dont REALY bash the savage hard yet i been driveing track and had a few cart wheels but they were light enough that the roll bar saved it. now i just want to know if u were in my shews what u would pick i would pick thicker but the X chassie and the .25 are just the same thickness and its alot about design so tell me whats better