PLEASE, HELP ME, I BEG YOU
#1
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Paphos, CYPRUS
Posts: 2,828
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE, HELP ME, I BEG YOU
Hi guys. I have a dragonfly 36 but i have a serious problem. First of all i'm a 100% beginner on these things. Well, my problem is that my heli spinning counter-clockwise. I don't know why. I try differnet pitch on my main blades, different servo position on my tail servo...and something else. When i move the rudder stick to the right (the heli goes clockwise), the rear blade STOPS. I don't know, the belt just stop moving. PLESAE HELP ME I'm desperate!!!
#2
Senior Member
Join Date: Oct 2007
Location: San Juan, PUERTO RICO (USA)
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
RE: PLEASE, HELP ME, I BEG YOU
if you ar new I recomend you get advice from an expert, go to hobby shop or find a heli club. is the best. its very hard to get correct setting and fly this things all alone without any knowledge
#3
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Paphos, CYPRUS
Posts: 2,828
Likes: 0
Received 0 Likes
on
0 Posts
RE: PLEASE, HELP ME, I BEG YOU
CHECK IT OUT. I FOUND THE DAMN PROBLEM. JESUS...MAN, I WILL KICK MY ASS. I HAVE THIS HELI SO LONG AND MY MIND DIDN'T WENT THERE NEVER.
BUT, I'M HOLY HAPPY RIGHT NOW AND I CONGRATULATE MYSELF , I FOUND THAT FREAKIN PROBLEM WHICH IS THE FOLLOWING.
The ****$d problem was that the pitch of the rear rotor blades was less or just ZERO. I told to myself..."Hey, stupid, ****in mind, what the **** is going on? If you can't solve the problem, JUST quit RC". Well, the problem, after assembled ALL the heli, was a ****in gear. The walkera 36 has a freakin gear which with a belt gives to the rear blades move. That gear has @ gears on it. One which catch the gear from the motor and one which gives a move to the rear rotor. That 2nd gear became a different part from the whole gear. Just see the photos and you will understand what stupid i am.
http://www.geocities.com/osirisf16/m...?1191956148109
BUT, I'M HOLY HAPPY RIGHT NOW AND I CONGRATULATE MYSELF , I FOUND THAT FREAKIN PROBLEM WHICH IS THE FOLLOWING.
The ****$d problem was that the pitch of the rear rotor blades was less or just ZERO. I told to myself..."Hey, stupid, ****in mind, what the **** is going on? If you can't solve the problem, JUST quit RC". Well, the problem, after assembled ALL the heli, was a ****in gear. The walkera 36 has a freakin gear which with a belt gives to the rear blades move. That gear has @ gears on it. One which catch the gear from the motor and one which gives a move to the rear rotor. That 2nd gear became a different part from the whole gear. Just see the photos and you will understand what stupid i am.
http://www.geocities.com/osirisf16/m...?1191956148109