TrRCER

ANY ONE HAVING PROBLEMS WITH DOG BONES POPPING OUT OF TRUGGY LET ME NO I GOT A GREAT FIX !!!!

fat1

everybody is and there's a huge thread about it here somewhere. They use cvd from a kyosho that are a few mm longer

TrRCER

you could do that to my solution was 17 mill hex and spacers

fat1

I dont have a matrix, I just read alot since my job is easy and I sit on an OC48.

chrobar

hey trRCER, try to search this forum for solutions, I've seen about 5 of these threads already.
Some solutions are getting the 17mm hex adapters and shim then behind the bearings to move the CVD farther back in outdrive. CEN is coming up with a fix for this soon, it will be a new H arm design. For a temporary fix, that help a little, I mounted the shocks on the bottom holes on the shock tower. The cheapest fix though, is putting fuel tubing on the shock shaft, thus limiting the up travel which causes the CVD to fall out of its outdrive.

CEN Racing

we are not coming ut with a new H design arm that is false