Sanwa Gemini II FM
#1
Thread Starter
Join Date: Sep 2006
Location: Midlands, UNITED KINGDOM
Posts: 8,217
Likes: 0
Received 0 Likes
on
0 Posts
Sanwa Gemini II FM
40mHz FM Transmitter with nicad pack
Dual nicad charger
RX-311 Micro receiver
'Y' Type switch harness
Transmitter flag.
this is the spec for it, however, i'm getting another RC car, so i need another RX, can i only use Gemini ones? i ask because they are double the price of a Hitec (FM) RX.
Dual nicad charger
RX-311 Micro receiver
'Y' Type switch harness
Transmitter flag.
this is the spec for it, however, i'm getting another RC car, so i need another RX, can i only use Gemini ones? i ask because they are double the price of a Hitec (FM) RX.
#2
RE: Sanwa Gemini II FM
40MHz? r they for ground use?
different country has different regulation..
But in general, as long as the frequency is the same, you can use any brand of receiver you want...
Good luck..
different country has different regulation..
But in general, as long as the frequency is the same, you can use any brand of receiver you want...
Good luck..
#4
Senior Member
Join Date: Oct 2005
Location: SAN DIEGO, CA CA
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sanwa Gemini II FM
Not necessarily. Sanwa (or Airtronics in USA) are positive shift, similar brands with positive shift are JR racing, and Ko propo. Hitec's are negative shift as well as futaba's, so the hitec rx will not work with your Gemini tx even with the same frequency and band. Unless you use a Hitec HFS-03MM rx which will work with all radios, or a Hitec DCX positive shift for Airtronics, JR & Ko.
IMO
IMO