Losi comp crawler
#1
Thread Starter
My Feedback: (27)
Join Date: Jan 2010
Location: Wilton,
NH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Losi comp crawler
Do you need to run lipo? and any suggestions. I am going to run a novak goat w /esc. And for a radio futaba 3pmx I am still not sure on servos trying to keep down on price.
#2
RE: Losi comp crawler
The LCC is designed to run lipo. But you can get custom configured NiMH packs from www.cheapbatterypacks.com that would fit. For a lipo, something in the 1300mah range with a 30C discharge rate would be good.
#4
RE: Losi comp crawler
I'm running a Hitec 7955. Expensive, but reliable for the most part. Great warranty/service department when/if the servo goes bad. Look for a servo with 200oz of torque MINIMUM. Ideally, you want 250oz torque or greater. You want metal/titanium gears. But with servos over 200oz of torque, they almost always have metal gears anyway.
I would also recommend an external BEC like the one Castle Creation makes. This is pretty much required if you run a 3S lipo.
I would also recommend an external BEC like the one Castle Creation makes. This is pretty much required if you run a 3S lipo.