Spektrum NX20 ESC Program
#1
Junior Member
Thread Starter
Join Date: Jan 2019
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Spektrum NX20 ESC Program
Looks to be a no-go for me to program my Twin Timber ESC with a Spektrum NX20. I can do it just fine with an IX20 but not an NX20. The latest firmware is in the NX20. Trying to program an SPMXAE0240B.
Thoughts?
Al
Thoughts?
Al
#3
Junior Member
Thread Starter
Join Date: Jan 2019
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
It is no longer broken. My fault. I had gone to the instructions in the Twin Timber manual but managed to miss the thrust reversing instructions. I went back and found those instructions, specifically step 4. I was on low rate aileron. It did get to step 2 with low rate aileron, but would no go on to step 3.
Sorry!
Al
Sorry!
Al