3d printed semovente 75/18
#1
3d printed semovente 75/18
Hi as soon as possible I will post some pictures of the Semovente 75/18 made by an Italian guy that is the perfect replica of the original tank in 1/16 scale… Rc of course…:
#4
Here it comes! Printed in synterized nylon high quality (the printer cost about 180k euros!!!), metal chassis brass soldered , bearings on sprocket wheels, bushes on the suspensions group, two electric motors and 3 servo for the cannon movements.
tested with Ibu and elmod electronics….
tested with Ibu and elmod electronics….
#5
All the hatches can be opened…
all the measures are taken from the real tank (stock in Italian museum).
if you have any questions or you are interested with this tank you can contact me.
all the measures are taken from the real tank (stock in Italian museum).
if you have any questions or you are interested with this tank you can contact me.