Indoor EDF Jets.
01-10-2024, 12:08 AM
#1
Thread Starter
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,650
Likes: 0
Received 72 Likes
on
68 Posts
Indoor EDF Jets.
It was always on my mind to build a small EDF jet to fly indoors, while hoping for 10-20mm EDF set up, no luck to date, so I gave it a try with 30mm set up I have a great experience with over the years.
Well, the 1st. one came up better than expected so shortly after I built 2nd. one slightly larger and slower.
While waiting for reopening of my regular indoors venues I'm having a ball flying both of them outdoors at indoor conditions, all you have to do is get up early.
Got to start somewhere.
Delicate work as any of my indoor 3/D Pattern types.
Finished products.
Outdoor test runs.
Blue sky maiden.
Well, the 1st. one came up better than expected so shortly after I built 2nd. one slightly larger and slower.
While waiting for reopening of my regular indoors venues I'm having a ball flying both of them outdoors at indoor conditions, all you have to do is get up early.
Got to start somewhere.
Delicate work as any of my indoor 3/D Pattern types.
Finished products.
Outdoor test runs.
Blue sky maiden.
06-14-2024, 12:43 AM
#3
Thread Starter
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,650
Likes: 0
Received 72 Likes
on
68 Posts
Weekly outing with my Indoor EDF at couple of my regular venues making most of it. Currently working on much smaller sizes experimenting with various motors to get the best out of.
Great size venue for this one at 65x33m, can be divided into 3 smaller halls.
Back at my local venue.
My latest micro jet designs, 1&2S powered.
Great size venue for this one at 65x33m, can be divided into 3 smaller halls.
Back at my local venue.
My latest micro jet designs, 1&2S powered.
