need help binding my spectrums
01-02-2010, 02:45 PM
#3
RE: need help binding my spectrums
5. With the transmitter off, place the transmitter sticks and auxiliary channels in their
desired fail-safe positions, normally brake and straight ahead steering.
6. Press and hold the bind button on the
transmitter module.
7. Turn on the transmitter while holding
the bind button.
8. Release the bind button after the green
LED flashes.
Observe that after several seconds the LED on the receiver and the LED on the
transmitter will quit flashing and remain solid, indicating that the binding process
was successful. Once binding is complete, the system will automatically connect.
desired fail-safe positions, normally brake and straight ahead steering.
6. Press and hold the bind button on the
transmitter module.
7. Turn on the transmitter while holding
the bind button.
8. Release the bind button after the green
LED flashes.
Observe that after several seconds the LED on the receiver and the LED on the
transmitter will quit flashing and remain solid, indicating that the binding process
was successful. Once binding is complete, the system will automatically connect.
