MVVS 2.15
04-14-2007, 06:23 PM
#1
MVVS 2.15
Im thinking of getting this engine. It is new never ran and there is not much the owner knows about it.
From the pic can anyone say if this is the newer style with the better ignition.
THANKS
Pat
PS I should mention this will be ran with the Evo black wraparound pitts muffler. The owner also said he was pretty sure the ignition uses 4.8v
From the pic can anyone say if this is the newer style with the better ignition.
THANKS
Pat
PS I should mention this will be ran with the Evo black wraparound pitts muffler. The owner also said he was pretty sure the ignition uses 4.8v
04-15-2007, 02:55 AM
#2
Join Date: Apr 2002
Location: NETHERLANDS
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
RE: MVVS 2.15
ORIGINAL: BankYank
From the pic can anyone say if this is the newer style with the better ignition.
From the pic can anyone say if this is the newer style with the better ignition.
04-16-2007, 02:22 AM
#5
My Feedback: (1)
RE: MVVS 2.15
I have the Red head 2.15, it's about 3 years old now, I have to use a 5 cell pack on the ignition or it wont start well, with the 5 cell it starts in 3, 4 or 5 flips, power is great,,,
wood prop,, 20x8 or 18x10,,,
the motor will pull a 16 pound plane no problem, not for 3Ding but no problem,, don't use a Zinger they flex to much,,
props I used with the inverted side muffler,,
3W 20x8 ,,,,,, 6800 RPM,
Zinger 20x8,,, 7500 RPM
Jim
wood prop,, 20x8 or 18x10,,,
the motor will pull a 16 pound plane no problem, not for 3Ding but no problem,, don't use a Zinger they flex to much,,
props I used with the inverted side muffler,,
3W 20x8 ,,,,,, 6800 RPM,
Zinger 20x8,,, 7500 RPM
Jim
