"Must have" for anyone working with Fliteskin or similar fiberglass/wood sheeting
#1
Thread Starter
My Feedback: (2)
"Must have" for anyone working with Fliteskin or similar fiberglass/wood sheeting
Looking for the ideal adhesive to attach Fliteskin or similar fiberglass/wood sheeting to your model?
I find this stuff superior to any epoxy or spray-on glue.
KLEIBERIT 501.0 PUR
The hardening process starts as soon as the glue is exposed to air.
* Working time 20 min. at room temperature (up to 30 min. in a cooler environment)
* Water resistant
* During the curing process expands slightly filling uneven wood surfaces for a perfect bond
* Secure bond after approx. 1 hour - maximum strength after 12 hrs.
* Sandable / paintable / non flammable
Originally purchased 2 bottles. However, one bottle is plenty to finish my project.
Consequently can sell the second bottle.
Shipping to Lower 48 or to Canada.
Mailing charges to be determined.
PayPal accepted
I find this stuff superior to any epoxy or spray-on glue.
KLEIBERIT 501.0 PUR
The hardening process starts as soon as the glue is exposed to air.
* Working time 20 min. at room temperature (up to 30 min. in a cooler environment)
* Water resistant
* During the curing process expands slightly filling uneven wood surfaces for a perfect bond
* Secure bond after approx. 1 hour - maximum strength after 12 hrs.
* Sandable / paintable / non flammable
Originally purchased 2 bottles. However, one bottle is plenty to finish my project.
Consequently can sell the second bottle.
Shipping to Lower 48 or to Canada.
Mailing charges to be determined.
PayPal accepted
Last edited by RC-Ambassador; 02-11-2020 at 02:52 PM.