Who's flying the Brillelli 46cc?
#1
Thread Starter
My Feedback: (6)
Join Date: Apr 2004
Location: howell,
MI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Who's flying the Brillelli 46cc?
Anyone out here using this motor? Looking for the usual: Props, RPM, weight of plane/performance, break in, ease of use/tuning, starting, ignition battery used, mounts used, etc...
At 325 bones for fixed timing and EI with muffler, how could you go wrong? I've heard nothing but good from this company so far.
Thanks.
At 325 bones for fixed timing and EI with muffler, how could you go wrong? I've heard nothing but good from this company so far.
Thanks.
#3
My Feedback: (29)
Join Date: Apr 2003
Location: Goldsboro, NC
Posts: 2,834
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I have a buddy that just ordered one, and he hasn't received it yet should be here this week, but the customer service has been great, the guys at Brillelli email quickly etc,,,,,,,,,[sm=thumbup.gif]
#4
My Feedback: (14)
RE: Who's flying the Brillelli 46cc?
Just send off an e-mail to Scott at Brillelli. He will get back with you ASAP. I don't have the 46 w/ei, but I do have Brillelli's new 42cc w/ei that I got at the Toledo RC Show. And boy his she a good looking engine. I weighed the engine and it weigh's only 3lbs 14oz. Not bad for a 42cc engine that I plan on installing on a GP Giant Big stick this coming week. Good luck with your 46cc and give Scott a shout. I know he'll answer any and all questions
#5
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I have a CG Extra 330 / Brillelli 46cc on it // Awesome combo.
I had a balance issue with the plane at first because I bought the plane with this combo and the original guy who set it up used a pull/pull. I sence moved the servo to the tail.
My plane weighs 13.15oz with the Brillelli .
The bare engine weighs just 2 lbs 13oz and this is lighter then a DA-50.
I use single Hitec 645mg for all surfaces @6v with a standard mini on the throttle.
I have 2800 Li-Ion from TBM with6v reg and 2800 Li-Ion from TBM with 5.4v reg for ign. These are lighter then any nimh or ni-cad. I have pitched all the crap foam wheels and use TBM Kavans light wheels. I also lightned the heavy canopy hatch and use no pilot or dash and took off 6.4 oz alone for that mod. Painted the canopy black.
Brillelli sells a light weight alum engine mounts at 3.2oz thats lighter then the others ones i had @ 5.0oz
Little details like this add up.
If you run a glow engine use the pull/pull and move the servo to the tail for a gasser.
This setup has insane power to weight. Hovers at 1/3 throttle. Light 3D floater. Love the fact that I don't have to trailer this size of plane. Fits in my short box 5.5' pick-up truck
I run a Xoar 22x8 on it.
Customer service from Brillelli is as good as anyone could ever hope for.
I look at Brillelli this way. For a 46cc not a true 50cc. It's 95+% of the of DA-50's horsepower at half the cost, That's a awesome bargain in my world.
The Extra 330 's are now selling for $265 bucks and where else could you get a great flying gasser for around a $1,000 bucks?
Plane $265.00
Engine $355.00
Hitec 645mg x5 $200.00
2800 Li-Ion from TBMx2 with regs appox $100.00
Wheels,throttle servos,Prop,ect,ect.. $100.00
Not including shipping Total - $1000.00+
Not having to clean up Glow Goo is a wonderful thing
I had a balance issue with the plane at first because I bought the plane with this combo and the original guy who set it up used a pull/pull. I sence moved the servo to the tail.
My plane weighs 13.15oz with the Brillelli .
The bare engine weighs just 2 lbs 13oz and this is lighter then a DA-50.
I use single Hitec 645mg for all surfaces @6v with a standard mini on the throttle.
I have 2800 Li-Ion from TBM with6v reg and 2800 Li-Ion from TBM with 5.4v reg for ign. These are lighter then any nimh or ni-cad. I have pitched all the crap foam wheels and use TBM Kavans light wheels. I also lightned the heavy canopy hatch and use no pilot or dash and took off 6.4 oz alone for that mod. Painted the canopy black.
Brillelli sells a light weight alum engine mounts at 3.2oz thats lighter then the others ones i had @ 5.0oz
Little details like this add up.
If you run a glow engine use the pull/pull and move the servo to the tail for a gasser.
This setup has insane power to weight. Hovers at 1/3 throttle. Light 3D floater. Love the fact that I don't have to trailer this size of plane. Fits in my short box 5.5' pick-up truck
I run a Xoar 22x8 on it.
Customer service from Brillelli is as good as anyone could ever hope for.
I look at Brillelli this way. For a 46cc not a true 50cc. It's 95+% of the of DA-50's horsepower at half the cost, That's a awesome bargain in my world.
The Extra 330 's are now selling for $265 bucks and where else could you get a great flying gasser for around a $1,000 bucks?
Plane $265.00
Engine $355.00
Hitec 645mg x5 $200.00
2800 Li-Ion from TBMx2 with regs appox $100.00
Wheels,throttle servos,Prop,ect,ect.. $100.00
Not including shipping Total - $1000.00+
Not having to clean up Glow Goo is a wonderful thing
#6
Senior Member
Join Date: Nov 2004
Location: Metropolis , ARUBA
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
What is different on this engine to a standard spe?, was considering a spe off the auction site, its only about a twenty quid price difference...what do you get from Brilleli for the small extra price?
#7
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
Must be talking about the spe26 or 40cc, im not a spokesmen for Brillelli but here's what I have learned about the difference btwn the two.
Scott at Brillelli's take apart the SPE and balance the crank, lighten the head by milling it and useing a very reliable proven CH ignition and not a chinese EI unit.
The Brillelli 46 isn't a SPE engine at all.
So over all you get a stronger,smoother and reliable running engine that to me is well worth the extra quid, not to mention customer service thats great.
my 2 cents.
Hope it helps you, good luck on your decision.
Scott at Brillelli's take apart the SPE and balance the crank, lighten the head by milling it and useing a very reliable proven CH ignition and not a chinese EI unit.
The Brillelli 46 isn't a SPE engine at all.
So over all you get a stronger,smoother and reliable running engine that to me is well worth the extra quid, not to mention customer service thats great.
my 2 cents.
Hope it helps you, good luck on your decision.
#8
Senior Member
Join Date: Nov 2004
Location: Metropolis , ARUBA
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
AAAH..THX lOOK, I was confusing things (shouldnt post before breakfast and at least 3 mugs o coffee) Hmm, looks more of a bargain than I though
#9
Senior Member
My Feedback: (40)
Join Date: May 2005
Location: Bear, DE
Posts: 4,104
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
Well I don't have a 46 anymore.. but I can tell you they are strong engines. All the specs on the site are very accurate.. in fact out of 3 engines I have purchased from Brillelli every time the rated "new" rpm numbers are lower than I got after properly setup for my location.
He tends to rate a bit low just to be safe...
Don't think you can go wrong
He tends to rate a bit low just to be safe...
Don't think you can go wrong
#10
Senior Member
My Feedback: (3)
Join Date: Oct 2004
Location: Piedmont,
OK
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
LookNatU2,
I just ordered the CG Extra 330 for my Brillelli 45 (prototype) yesterday. My intended setup is so similar to yours it's almost scary. Seeing your post makes me glad I ordered mine. I'll look into those lightening mods too...
I just ordered the CG Extra 330 for my Brillelli 45 (prototype) yesterday. My intended setup is so similar to yours it's almost scary. Seeing your post makes me glad I ordered mine. I'll look into those lightening mods too...
#12
RE: Who's flying the Brillelli 46cc?
LookNatU2,
I am planning to power my CG Extra 330 with a Brillelli 40 motor. Do you think that it will provide satisfactory power for IMAC style aerobatics including genral sport flying.
Karol
I am planning to power my CG Extra 330 with a Brillelli 40 motor. Do you think that it will provide satisfactory power for IMAC style aerobatics including genral sport flying.
Karol
#13
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I believe it would, but for just a few bucks more you could have a 46cc. Only like 3 oz difference in weight, but yes, if your want to go with a 40 I think you'd be happy. both have good power.
The canopy hatches are kinda heavy on the Extra, I cut the floor out and that was worth like 4.2 oz if i remember right.
no dash and no pilot and it was good for another 2.2oz.
I really like the thick fat wings on the extra.. slow flights are great.
The canopy hatches are kinda heavy on the Extra, I cut the floor out and that was worth like 4.2 oz if i remember right.
no dash and no pilot and it was good for another 2.2oz.
I really like the thick fat wings on the extra.. slow flights are great.
#14
My Feedback: (1)
Join Date: Sep 2004
Location: Louisville,
KY
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I too have just ordered my CG Extra 330 for $265. I have been contemplating which engine to use but i think you guys have got me hooked on the Brilelli. If it will hover at 1/3 throtle i will be very happy. Thanks for the help?
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
#15
Senior Member
Join Date: Jan 2006
Location: Nettleton,
MS
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
the next thing on my table is a ca models extra 300L 27%.........i will be getting with scott at brillelli to order this engine.....at 386 with all the goodies + everything positive i've heard about this engine = how can you go wrong???
#16
Senior Member
My Feedback: (40)
Join Date: May 2005
Location: Bear, DE
Posts: 4,104
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
ORIGINAL: ledsled
I too have just ordered my CG Extra 330 for $265. I have been contemplating which engine to use but i think you guys have got me hooked on the Brilelli. If it will hover at 1/3 throtle i will be very happy. Thanks for the help?
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
I too have just ordered my CG Extra 330 for $265. I have been contemplating which engine to use but i think you guys have got me hooked on the Brilelli. If it will hover at 1/3 throtle i will be very happy. Thanks for the help?
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
They are saying 13-14 pounds.. I bet you it comes in a tad higher with a gas engine. 40 would do IMAC but you def. want the 46 for 3D
#17
Senior Member
My Feedback: (40)
Join Date: May 2005
Location: Bear, DE
Posts: 4,104
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I am surprised those things are selling so cheap. If they come in at their weight stock you can prob hit 13 pounds with some CF. I have a GP Patty at 15 pounds and it only has 40 sqs more. At 13 pounds that is 26.7 oz/wingloading vs a light Patty at 30.3 oz/wingloading. That's a big difference there.
This plane is pretty much a no brainer for the price!
This plane is pretty much a no brainer for the price!
#18
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
ORIGINAL: ledsled
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
LookNatU2
Did you fly the extra before you lightened it up, if so how was the verticle then compared to now? Will it still be okay if i didn't lighten it?
Also landed at a high speed, wouldnt fly slow for very good at all. This plane wasnt designed to weigh 16kbs with 1118 sq in of wing area period. I have posted in other post that i bought this plane from the original builder and to put it mildly it wasnt built right not with even a thought of trying to conserve weight. I got this plane from a guy selling out of the hobby and it was the one I liked more then the other H9 Extra 260/FPE 40cc on it. The CG Extra330 has thicker wings and larger control surfaces that appealed to me over the H9 Extra 260. I also like the fact this Brillelli had more power then the FPE 40cc (First Place Engine).
So I have gone through and redid this plane how I wanted it. Scott at Brillelli engines has really showed a 1st class effort when coming to bring my engine up to the standards their at now. See my 46cc was a very early release and lots of changes to get them where their at today including the engine being 5.0z lighter then my early version. Did all the updates mods for free for me.. What more can be said about his customer service? "Outstanding".
Ok, so back to the "Verticle" at 16lbs and heavy wing loading hovered at 3/4 throttle. Plane isnt a floater at 16lbs, but
at 14 to 14.5lbs you'll have a great flying plane with gobs and gobs of power.
Believe me you wont have the issue's i've had about weight buying a new plane. You will have to mount the servo's in the tail, dont use the pull-pull, that's for glow engine setup's. If you use nimh or ni-cad's instead of Lipo's expect to add just 3-5oz. No lightened canopy and use a pilot/dash add 6-8oz and use wheel pants, (I dont) add 3.5 oz so thats about a 1lbs more of weight your gonna carry around. I love lipo's, won't ever use the others again. U have to remember you wont have the setup this other guy that built my plane used, like 4.0oz of rubber silicon to mount a battery in the tail becaused he used the pull/pull instead of mounting the servo's in the tail. Didnt use Brillelli's alum mounts for the engine that are 2oz lighter then the ones i had on there. U wont's have 2/3oz of extra crap on the alum mounts to mount the engine instead of mounting the engine directly the engine mounts. ( He had some joke setup that just added weight). On and ON just crap that ended up making this plane weigh 16lbs. So don't let that weigh scare you because even w/o lipo's, lightened canopy and wheel pants on the plane should still come in under 15lbs because you'll have the new lightened Brillelli that's over 5oz lighter then the one i had not to mention that brillelli has a NEW lighter muffler that's only 2.8oz, my old muffler weighed 5.8 oz
SO, build your plane as light as you can, it's worth it in the long run and you'll be happier you spent the extra coin to do it.
Hope my 2 cent helps.
#19
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
BTW, Towerhobby's have the Extra even cheaper use stock# EM1013
http://www2.towerhobbies.com/cgi-bin...?&I=EM1013&P=7
Sign up for their email list, they'll send you emails with 10-25 dollars off any purchase.
$244.99 use a coupon and get it cheaper.
Good luck.
http://www2.towerhobbies.com/cgi-bin...?&I=EM1013&P=7
Sign up for their email list, they'll send you emails with 10-25 dollars off any purchase.
$244.99 use a coupon and get it cheaper.
Good luck.
#21
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
ORIGINAL: ledsled
LookNatU2 thanks for all the help i cant wait to get this great new plane in the air.
LookNatU2 thanks for all the help i cant wait to get this great new plane in the air.
Your welcome, Right now to Towerhobbys has FREE shipping on orders over $125 bucks..
Where are these deals when I need a plane??? LOL
#22
Senior Member
Join Date: Sep 2003
Location: Sandy,
UT
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
LookNatU2,
Thanks for the heads up on the CG 330S from Tower. Went to the site and ordered mine. Will be ordering a Brillelli 46 now to power it.
Thanks for the heads up on the CG 330S from Tower. Went to the site and ordered mine. Will be ordering a Brillelli 46 now to power it.
#24
Senior Member
Join Date: Jun 2006
Location: sevierville,
TN
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I've got the brillelli 46 on my EF yak 74" and it's a great running engine. I think It takes a while to get it broken in though as I have had several deadsticks and am starting on my second gallon through it. scott is the greatest though, he actually called me to make sure I got it running properly!
#25
My Feedback: (11)
Join Date: Sep 2004
Location: Cedar Rapids,
IA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who's flying the Brillelli 46cc?
I have almost 2 gals on my 46cc and never a deadstick. U turn up the idle after take-off?
If not the air pushing back on the prop during 3 d flight will kill any engine at a low idle stance like that on the ground.
If not the air pushing back on the prop during 3 d flight will kill any engine at a low idle stance like that on the ground.