Dx 6
#1
Thread Starter
Join Date: Nov 2006
Location: RATHDRUMID
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Dx 6
I've been using my DX 6 to fly five different RC planes (electric and glow). My question-when is it pertinent to bind the transmitter to an individual plane. I have saved each plane in the DX 6 memory. Is this enough..?
Thank you for your time. Respectfully, Bruce W
Thank you for your time. Respectfully, Bruce W
#2
The "transmitter" doesn't get bound to the airplane, the "model memory" does. Each model in the transmitter has a separate bind info package.
If you bound each model memory to its model airplane receiver, then they stay bound. When you select a different model memory in the transmitter, it talks only to that model. Assuming, of course, that you didn't bind multiple receivers to the same model memory...
Andy
If you bound each model memory to its model airplane receiver, then they stay bound. When you select a different model memory in the transmitter, it talks only to that model. Assuming, of course, that you didn't bind multiple receivers to the same model memory...
Andy