carb settings
]
12-25-2006, 05:41 PM
#2
Senior Member
Join Date: May 2006
Location: Manchester, UNITED KINGDOM
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
RE: carb settings
Probably as with most engines, turn the screw clockwise till its starts to fel tight, do not go all the way as it can damage the carb, then unscrew/screw anticlockwise 2 1/2 to 3 turns.
This is usually the factory settings and should be close to flush
Hope it helps
Ryan
This is usually the factory settings and should be close to flush
Hope it helps
Ryan
