Fuji-IMVAC 86 ignition fault
08-30-2011, 04:12 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: , , UNITED KINGDOM
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Fuji-IMVAC 86 ignition fault
I am having lots of trouble with the ignition on my Fuji-IMVAC 86, I have replaced several coil packs, the indication when they start failing is the engine starts to misfire at high RPM, is there any reason why I couldn't fit the RCEXL ignition system to the engine, if not, could you please advise me why.
Thanks in advance
Rich
Thanks in advance
Rich
08-30-2011, 05:38 AM
#2
RE: Fuji-IMVAC 86 ignition fault
It should be a fairly easy process to fit an RC exl ignition to your engine. Check with RC exl vendors like Jody at Valley View, Milton at RC Extreme or Ralph at RC Ignitions for correct purchase and fitting details.
Karol
Karol
08-30-2011, 07:11 AM
#3
RE: Fuji-IMVAC 86 ignition fault
The original sensor will fire a RCexl ignition but it will be timed wrong,
One way to get around this is to pull the prop hub and flywheel and remove the key from the key way and time the flywheel for the engine to fire at 28 deg and the tighten the bolt holding the flywheel, The tamper on the crank and flywheel will hold it in place, The key is just there for aliment during assembly of the engine parts.
Milton
One way to get around this is to pull the prop hub and flywheel and remove the key from the key way and time the flywheel for the engine to fire at 28 deg and the tighten the bolt holding the flywheel, The tamper on the crank and flywheel will hold it in place, The key is just there for aliment during assembly of the engine parts.
Milton
08-30-2011, 07:19 AM
#4
RE: Fuji-IMVAC 86 ignition fault
Get in touch with Paul at www.gashanger.com
He is located in the UK and might be able to help you.
Milton
He is located in the UK and might be able to help you.
Milton
