C&C Models L39
09-21-2011, 11:58 AM
#1
Member
Thread Starter
Join Date: Jun 2009
Location: , ESTONIA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
C&C Models L39
I'm started to build a C&C Models L-39 . Its very similar to Fei Bao L-39, but lighter (airframe weight 3200 grams).
The model came well packed, and the quality seems quite good. Unfortunately, it comes without manual, only a picture with COG location.
I'll try to use the Feibao manual when possible.
I'm going to use DS3288 servos on all flying surfaces and Merlin VT80 to power it.
lisa.chem.ut.ee/~ivar/l39-big.jpg
The model came well packed, and the quality seems quite good. Unfortunately, it comes without manual, only a picture with COG location.
I'll try to use the Feibao manual when possible.
I'm going to use DS3288 servos on all flying surfaces and Merlin VT80 to power it.
lisa.chem.ut.ee/~ivar/l39-big.jpg
09-22-2011, 12:31 AM
#3
Member
Thread Starter
Join Date: Jun 2009
Location: , ESTONIA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: C&C Models L39
I ordered the LG a bit later than the airframe, so the only picture I have is from cmodels homepage - cmodels.it/modelli_jet/foto/L39%20RETRACT%20KIT.jpg
I take camera tomorrow and take a picture of the LG mounts, seems durable enough for me. I plan to use cmodel oleos and wheels and eflite retracts.
I take camera tomorrow and take a picture of the LG mounts, seems durable enough for me. I plan to use cmodel oleos and wheels and eflite retracts.
