onboard glow
08-30-2003, 09:38 PM
#2
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 16 Likes
on
14 Posts
onboard glow
Jeff:
This has been hashed over on RCU many times.
If you want to be fancy, get one of the electronic controllers.
If you want less expense with a switched glow driver hang a micro switch on the throttle servo, turn it on when getting down toward idle.
Or do it the simple way. Hook a remote connector to the glow plug and hard wire a sub C nicad to stay on all the time. If the plug is accessible you don't even need a switch - take the connector off the plug when not starting or running.
Bill.
This has been hashed over on RCU many times.
If you want to be fancy, get one of the electronic controllers.
If you want less expense with a switched glow driver hang a micro switch on the throttle servo, turn it on when getting down toward idle.
Or do it the simple way. Hook a remote connector to the glow plug and hard wire a sub C nicad to stay on all the time. If the plug is accessible you don't even need a switch - take the connector off the plug when not starting or running.
Bill.
