Question about jet wagging
#1
Thread Starter
Question about jet wagging
So I was out putting flight # 28 on the f-16 and I noticed some wag at high speeds, we did have a 10 mph cross wind but if I remember correctly is has always done this. Is this a thrust issue? maybe the turbine isn't in-line or could it just be winds. Only seems to do it at full throttle
#3
My Feedback: (1)
RE: Question about jet wagging
My old Yellow AC ducted fan F-16 did the same thing. It was much worse when the ventral fins were not attached (I often flew it without the ventral fins following low passes).
If you have the ventral fins installed and it is still doing it you might try adding a gyro to the rudder to try and dampen it a little.
If you have the ventral fins installed and it is still doing it you might try adding a gyro to the rudder to try and dampen it a little.
#5
Thread Starter
RE: Question about jet wagging
I think the bottom fins maybe off, FEJ didnt put the holes in the right spot
ORIGINAL: Kevin_W
My old Yellow AC ducted fan F-16 did the same thing. It was much worse when the ventral fins were not attached (I often flew it without the ventral fins following low passes).
If you have the ventral fins installed and it is still doing it you might try adding a gyro to the rudder to try and dampen it a little.
My old Yellow AC ducted fan F-16 did the same thing. It was much worse when the ventral fins were not attached (I often flew it without the ventral fins following low passes).
If you have the ventral fins installed and it is still doing it you might try adding a gyro to the rudder to try and dampen it a little.
#6
My Feedback: (2)
RE: Question about jet wagging
Great bud. Maidened my C-ARF Tutor today. Sweet bird. Good to see your 16 is still chugging along. You get the small FEJ 14 or large one? What are you going to use for blow?
Shaz
Shaz
ORIGINAL: FenderBean
Hey hows it going?
Hey hows it going?
ORIGINAL: sskianpour
Keith, it's just happy to see you.
Shaz
Keith, it's just happy to see you.
Shaz
#7
RE: Question about jet wagging
Hi Fender -
both my SM 1:6 F-16's have wagged at high speed, it can be minimized with a gyro on the rudder,
that takes out most of the wagging and makes it look much better at full throttle.
Tor
both my SM 1:6 F-16's have wagged at high speed, it can be minimized with a gyro on the rudder,
that takes out most of the wagging and makes it look much better at full throttle.
Tor
#8
Thread Starter
RE: Question about jet wagging
Thanks I will give it a try or just deal with it = )
ORIGINAL: icepilot
Hi Fender -
both my SM 1:6 F-16's have wagged at high speed, it can be minimized with a gyro on the rudder,
that takes out most of the wagging and makes it look much better at full throttle.
Tor
Hi Fender -
both my SM 1:6 F-16's have wagged at high speed, it can be minimized with a gyro on the rudder,
that takes out most of the wagging and makes it look much better at full throttle.
Tor
#9
Thread Starter
RE: Question about jet wagging
I got the Large, I am planning two Kingtech 140s
ORIGINAL: sskianpour
Great bud. Maidened my C-ARF Tutor today. Sweet bird. Good to see your 16 is still chugging along. You get the small FEJ 14 or large one? What are you going to use for blow?
Shaz
Great bud. Maidened my C-ARF Tutor today. Sweet bird. Good to see your 16 is still chugging along. You get the small FEJ 14 or large one? What are you going to use for blow?
Shaz
ORIGINAL: FenderBean
Hey hows it going?
Hey hows it going?
ORIGINAL: sskianpour
Keith, it's just happy to see you.
Shaz
Keith, it's just happy to see you.
Shaz
#11
Thread Starter
RE: Question about jet wagging
Now I have motivation to put mine on
ORIGINAL: dubd
All three 1/6 F-16s I've owned had wag. However, the wag went away when I installed the wing tanks.
All three 1/6 F-16s I've owned had wag. However, the wag went away when I installed the wing tanks.