A late thank you
#1
A late thank you
Hi Gang,
About 6 weeks ago I made a post about my ailerons being loose and I did not have the fine trim adjustments.
Just about everyone gave me the same advice so I used slow drying CA and that cured the problem where the rod was loose on the hinge.
As for the short rod that comes out of the root section I did open that up with the dremel tool and built up the inside with Sevon epoxy and now that rod doesn't rock in the hole.
Now my aierons are nice and tight and I have my trim.
Thanks to the experts here at RCU.
Many thanks
About 6 weeks ago I made a post about my ailerons being loose and I did not have the fine trim adjustments.
Just about everyone gave me the same advice so I used slow drying CA and that cured the problem where the rod was loose on the hinge.
As for the short rod that comes out of the root section I did open that up with the dremel tool and built up the inside with Sevon epoxy and now that rod doesn't rock in the hole.
Now my aierons are nice and tight and I have my trim.
Thanks to the experts here at RCU.
Many thanks