Need a 6-9oz 3d Foamy
01-11-2011, 07:09 AM
#1
Thread Starter
My Feedback: (44)
Join Date: Jan 2002
Location: Fort Fairfield,
ME
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
Need a 6-9oz 3d Foamy
Guys,
I need a 3D foamy for my Eftile Park 300 motor set up in the 6-9oz range. Anyone have any suggestions??
Thanks for your help.
Jeff
I need a 3D foamy for my Eftile Park 300 motor set up in the 6-9oz range. Anyone have any suggestions??
Thanks for your help.
Jeff
03-02-2011, 06:25 AM
#3
Junior Member
Join Date: Apr 2005
Location: Hanover,
ON, CANADA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need a 6-9oz 3d Foamy
Hi Jeff,
My Foamy Mayhem or Foamy Disc would be a good fit for your motor. The Disc has been very popular for its durability and hovering capabilities. Not many flying wings (disc or delta shape) can hover with any authority and they just spin around as soon as the plane is in a true vertical hover. The Disc has "3D" Tabs to overcome the motor torque while the wing is unloaded (pointing straight up).The Mayhem also has good durability, but will do a lot more maneuvers like knife edge loops. Both designs will handle a lot of wind. Up here in Ontario you are likely to find a Disc or Mayhem flying when it is too windy to fly the dirty birds.
[link=http://www.foamydisc.com]Foamy Disc Models[/link]
Cory
My Foamy Mayhem or Foamy Disc would be a good fit for your motor. The Disc has been very popular for its durability and hovering capabilities. Not many flying wings (disc or delta shape) can hover with any authority and they just spin around as soon as the plane is in a true vertical hover. The Disc has "3D" Tabs to overcome the motor torque while the wing is unloaded (pointing straight up).The Mayhem also has good durability, but will do a lot more maneuvers like knife edge loops. Both designs will handle a lot of wind. Up here in Ontario you are likely to find a Disc or Mayhem flying when it is too windy to fly the dirty birds.
[link=http://www.foamydisc.com]Foamy Disc Models[/link]
Cory
03-02-2011, 08:31 AM
#5
Junior Member
Join Date: Apr 2005
Location: Hanover,
ON, CANADA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need a 6-9oz 3d Foamy
Yes it looks like a VTO, but it is very different in other ways. The same way an Extra 300 sorta looks like a warbird. The foamies are both disc shape planes but fly very different.
The Foamy Disc is 5oz flying weight with a 50 watt motor. It is much more durable. Many people have flown them straight into the ground while under power with only a broken prop to show for it.
The 3D tabs make a real difference to flight performance. At minimal flight speed there is still full pitch control enabling much slower flight.
I do not advertise (yet), but I always sell out at shows and 80% of people that try a Disc or Mayhem end up buying one.
The VTO is a good design in its own right. It all depends how you want to fly.
Cory
The Foamy Disc is 5oz flying weight with a 50 watt motor. It is much more durable. Many people have flown them straight into the ground while under power with only a broken prop to show for it.
The 3D tabs make a real difference to flight performance. At minimal flight speed there is still full pitch control enabling much slower flight.
I do not advertise (yet), but I always sell out at shows and 80% of people that try a Disc or Mayhem end up buying one.
The VTO is a good design in its own right. It all depends how you want to fly.
Cory
12-23-2011, 12:22 PM
#6
Senior Member
Join Date: Aug 2005
Location: Lawrenceville,
IL
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need a 6-9oz 3d Foamy
Here you go! It's a great trainer,and will do anything you ask of it![sm=thumbup.gif] Ron http://www.youtube.com/watch?v=L_KnZ...layer_embedded
06-02-2012, 09:55 AM
#7
Junior Member
Join Date: Jul 2011
Location: Alfta, SWEDEN
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need a 6-9oz 3d Foamy
Oops, old thread...
I have a Twisted Hobbys/RC-Factory Edge 540. Their 32" size models are perfect for the Park 300.
This is not me and my plane, but a 32" plane with Park 300:
[youtube]http://www.youtube.com/watch?v=eQx4-_ai5Hg[/youtube]
I have a Twisted Hobbys/RC-Factory Edge 540. Their 32" size models are perfect for the Park 300.
This is not me and my plane, but a 32" plane with Park 300:
[youtube]http://www.youtube.com/watch?v=eQx4-_ai5Hg[/youtube]
06-19-2012, 08:04 PM
#8
Junior Member
Join Date: Feb 2009
Location: glendale,
CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need a 6-9oz 3d Foamy
check out http://www.3dhornet.com
just use black depron to keep her light and a 50gram motor on a 500mah lipo
just use black depron to keep her light and a 50gram motor on a 500mah lipo
