TT-01 Shock Length
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Erie, PA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
TT-01 Shock Length
I have been looking online for an aftermarket shock and spring set. I have found some pretty cheap at the 65mm size. What size shock does the TT-01 take? Do I need to need to spend $40 to $50 for shocks that say they are for the TT-01?
#2
Join Date: Jul 2007
Location: North West Indiana
Posts: 12,861
Likes: 0
Received 20 Likes
on
19 Posts
RE: TT-01 Shock Length
I used shocks off a Nitro HPI Rs4 EVO 3, and they fit fine. Just needed to use screws instead of the Tamiya ball ends I also used the Tamiya springs off the TT01 (I just wanted dampening instead of springy bounce)
I'm more than sure you can use shocks off most on-roads seeing they are all about the same basic design
I'm more than sure you can use shocks off most on-roads seeing they are all about the same basic design
#3
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Erie, PA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: TT-01 Shock Length
I was looking at these. Looks like you can get 4 for under $10 shipped.<div>
</div><div>http://www.ebay.com/itm/6602-1-10-Sc...ht_2564wt_1396</div><div>
</div><div></div>
</div><div>http://www.ebay.com/itm/6602-1-10-Sc...ht_2564wt_1396</div><div>
</div><div></div>