DLE break in props
#1
Thread Starter
My Feedback: (1)
Join Date: Jan 2008
Location: Arlington,
TX
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
DLE break in props
Hello all I know this has been asked a thousand times but im asking anyways. What is the best break in prop for a DLE 30 And 35RA as I have both. Thanks guys
#2
RE: DLE break in props
i messed around with the recommended breakin prop on my 30, and felt it was a bit small...I have my 30 on a 1/4 H9 Cub and experimented with props, and IMO my fave prop is a Xoar 19x6, even though the 18x10 mejzlik looked awesome on her.. i get about 80-8100K rpm which is about right for the engine
#4
My Feedback: (5)
Join Date: Feb 2008
Location: Indio, CA
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE break in props
ORIGINAL: Truckracer
From day one, I just use the prop I plan to fly the airplane with. I don't change until I find something better. In other words, no special break in prop.
From day one, I just use the prop I plan to fly the airplane with. I don't change until I find something better. In other words, no special break in prop.
Mike
#6
RE: DLE break in props
Put a Xoar 19x8 on it tune it and fly it . You will have to retune a few times as the engine breaks in but the 19x8 won't over load it and will give you the best overall performance If after it broken in and you need more speed you can go to a 19x10 , less speed more pull 20x6 scimitar style prop (I use the Red Wing RC 20x6 on mine )- only after a few gallons of flying time on break in with the 19x8 . On the 35 you may be able to use a 20x8 after its broken in enough.