TL01B help Newbie help!
10-08-2013, 12:47 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2013
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
TL01B help Newbie help!
Hi all! Im new to this site! I live in the UK and im an average teenager with limited funds 
!
Ive had this TL-01B for a few months and want to convert it back to a TL-01 road car with the short arms etc.... But im not totally sure on what to buy to complete it but would like to switch back and forth on the same chassis from the extended arms etc to the standard arms etc
Ive been looking on ebay and i think i might need this spare parts bag...http://www.ebay.co.uk/itm/Tamiya-507...item589d83f02b
Then the adjustable tie ends? http://www.ebay.co.uk/itm/3508240682...84.m1438.l2649
Also The specs of the RC is Standard silver can motor, ball bearings on the way(can they be taken out and then placed into the standard tl01 parts if i decide to switch ?), everything else is pretty stock did have some fun with just pure rwd.
Hopefully wanting to run a 19T motor with everything else untouched and just switch between parts.
Please help me on this
!Ive had this TL-01B for a few months and want to convert it back to a TL-01 road car with the short arms etc.... But im not totally sure on what to buy to complete it but would like to switch back and forth on the same chassis from the extended arms etc to the standard arms etc
Ive been looking on ebay and i think i might need this spare parts bag...http://www.ebay.co.uk/itm/Tamiya-507...item589d83f02b
Then the adjustable tie ends? http://www.ebay.co.uk/itm/3508240682...84.m1438.l2649
Also The specs of the RC is Standard silver can motor, ball bearings on the way(can they be taken out and then placed into the standard tl01 parts if i decide to switch ?), everything else is pretty stock
did have some fun with just pure rwd.Hopefully wanting to run a 19T motor with everything else untouched and just switch between parts.
Please help me on this
10-10-2013, 05:09 PM
#2
Welcome to rcuniverse.....
ive always had a soft spot for the TL01. I still have 2 of them lol.
ok, what u will need is....
top camber links
bottom controll arms and screws
front toe links
dogbones
Touring car body mounts
touring car wheels
touring car body
By the looks the 50737 parts bag will cover the
Top camber links
Bottom controll arms
ballends for toe links
Touring Car body mounts..
u will still need
2 screws to mount the front body mounts
8 screws to assemble the bottom controll arms
2 turnbuckles for toe links
4 dog bones
Tc wheels
Tc body. And clips
hope this helps good luck
oh.... just make sure ur ESC is rated for a 19t motor
ive always had a soft spot for the TL01. I still have 2 of them lol.
ok, what u will need is....
top camber links
bottom controll arms and screws
front toe links
dogbones
Touring car body mounts
touring car wheels
touring car body
By the looks the 50737 parts bag will cover the
Top camber links
Bottom controll arms
ballends for toe links
Touring Car body mounts..
u will still need
2 screws to mount the front body mounts
8 screws to assemble the bottom controll arms
2 turnbuckles for toe links
4 dog bones
Tc wheels
Tc body. And clips
hope this helps good luck
oh.... just make sure ur ESC is rated for a 19t motor
10-13-2013, 07:21 AM
#3
Junior Member
Thread Starter
Join Date: Oct 2013
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to rcuniverse.....
ive always had a soft spot for the TL01. I still have 2 of them lol.
ok, what u will need is....
top camber links
bottom controll arms and screws
front toe links
dogbones
Touring car body mounts
touring car wheels
touring car body
By the looks the 50737 parts bag will cover the
Top camber links
Bottom controll arms
ballends for toe links
Touring Car body mounts..
u will still need
2 screws to mount the front body mounts
8 screws to assemble the bottom controll arms
2 turnbuckles for toe links
4 dog bones
Tc wheels
Tc body. And clips
hope this helps good luck
oh.... just make sure ur ESC is rated for a 19t motor
ive always had a soft spot for the TL01. I still have 2 of them lol.
ok, what u will need is....
top camber links
bottom controll arms and screws
front toe links
dogbones
Touring car body mounts
touring car wheels
touring car body
By the looks the 50737 parts bag will cover the
Top camber links
Bottom controll arms
ballends for toe links
Touring Car body mounts..
u will still need
2 screws to mount the front body mounts
8 screws to assemble the bottom controll arms
2 turnbuckles for toe links
4 dog bones
Tc wheels
Tc body. And clips
hope this helps good luck
oh.... just make sure ur ESC is rated for a 19t motor
.... I think i got a few spare screws but not sure... anyone on the forum have a bunch of spare screws willing to sell cheap 
haha or could get them from a D.I.Y shop? also the turnbuckles if anyone has a spare set i could have i'm willing to pay for But the body can wait as im going to mould a Mitsubishi Legnum estate as a project at college!
