Xicoy v10 ECU
#3
Join Date: Feb 2009
Location: Houma, Louisiana 70364 LA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I would have to believe its the same as with previous versions.
If I recall correctly: #1 ) trim at high position, with throttle all the way down #2) power up. #3) press far left button
If I recall correctly: #1 ) trim at high position, with throttle all the way down #2) power up. #3) press far left button
#5
Join Date: Feb 2009
Location: Houma, Louisiana 70364 LA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Dura Flame
I must apologize. I was Bass Ackwards in my procedure for accessing the last 52 minutes of stored run parameters.
With trim and throttle all the way down, Power off the GSU. Power back on and immediately press the far right button then immediately press the scroll down button.
Still don't know if this is the "hidden menu" you were looking for.
I must apologize. I was Bass Ackwards in my procedure for accessing the last 52 minutes of stored run parameters.
With trim and throttle all the way down, Power off the GSU. Power back on and immediately press the far right button then immediately press the scroll down button.
Still don't know if this is the "hidden menu" you were looking for.