Aero-Works P-51 Excalibur 50cc Warbird w/Robert Elec Retracts
#1
Thread Starter
My Feedback: (35)
Join Date: Oct 2008
Location: Martinez,
GA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Aero-Works P-51 Excalibur 50cc Warbird w/Robert Elec Retracts
Airframe with Robart Electric Retracts only $1,200.00
o Excalibur decaling.
o Factory painted aluminum spinner.
o New uncut engine cowl.
o Machined aluminum scale wheels.
o Full body WWII Pilot with servo operated head.
o Bomb and Drop tanks. (one of the drop tanks has a dent in it, was like that when I got it)
o Gear & Door sequencer that came with the plane.
o Manual on CD
o Custom built transport and assembly cradle.
Plug and Play for $2,400.00
All in frame servo wires are covered with nylon sheathing. Cockpit has some painted details, sliding canopy, full body pilot with moving head. Robart electric main gear and tail wheel retracts with controller. The inner gear doors are setup to operate with sub micro HS-82 MG servos. The inner doors and linkages are not currently installed but come with plane and could easily be re-install. Includes the following:
o Spectrum A6180 Servos for the throttle and choke.
o Spectrum A6030 Servos w/aluminum arms on all control surfaces.
o (3) Spectrum 2150mAh 6.0V NiMH Receiver Packs
o Ignition switch and 3 charge jacks.
o (2) 12" 4-Servo quick-lock connectors. Two plugs and you're all connected.
o DLE-55RA with rcexl opto kill switch.
o Excalibur decaling.
o Factory painted aluminum spinners. (1) 2 Blade and (1) 4 Blade
o (1) 2 blade 22 X 10 Xoar Sword prop - Silver w/Black tips.
o (1) 4 Blade 19 X 8 Biela scale warbird prop.
o Machined aluminum scale wheels.
o Full body WWII Pilot with servo operated head.
o Bomb and Drop tanks. (plus an extra set of drop tanks, one of which is dented)
o Gear & Door sequencer that came with the plane.
o Manual on CD
o Custom built transport and assembly cradle.
o (3) Extra Spectrum A6030 Servos.
o (1) Extra Dave Brown 5" aluminum parabolic spinner.
o (1) new uncut engine cowl.
o (1) used cowl cut for the DLE55RA. It got damaged due to lose cowl bolts (my fault). I still fly it with the used one.
I would prefer local pick up or will travel a reasonable distance to deliver.
o Excalibur decaling.
o Factory painted aluminum spinner.
o New uncut engine cowl.
o Machined aluminum scale wheels.
o Full body WWII Pilot with servo operated head.
o Bomb and Drop tanks. (one of the drop tanks has a dent in it, was like that when I got it)
o Gear & Door sequencer that came with the plane.
o Manual on CD
o Custom built transport and assembly cradle.
Plug and Play for $2,400.00
All in frame servo wires are covered with nylon sheathing. Cockpit has some painted details, sliding canopy, full body pilot with moving head. Robart electric main gear and tail wheel retracts with controller. The inner gear doors are setup to operate with sub micro HS-82 MG servos. The inner doors and linkages are not currently installed but come with plane and could easily be re-install. Includes the following:
o Spectrum A6180 Servos for the throttle and choke.
o Spectrum A6030 Servos w/aluminum arms on all control surfaces.
o (3) Spectrum 2150mAh 6.0V NiMH Receiver Packs
o Ignition switch and 3 charge jacks.
o (2) 12" 4-Servo quick-lock connectors. Two plugs and you're all connected.
o DLE-55RA with rcexl opto kill switch.
o Excalibur decaling.
o Factory painted aluminum spinners. (1) 2 Blade and (1) 4 Blade
o (1) 2 blade 22 X 10 Xoar Sword prop - Silver w/Black tips.
o (1) 4 Blade 19 X 8 Biela scale warbird prop.
o Machined aluminum scale wheels.
o Full body WWII Pilot with servo operated head.
o Bomb and Drop tanks. (plus an extra set of drop tanks, one of which is dented)
o Gear & Door sequencer that came with the plane.
o Manual on CD
o Custom built transport and assembly cradle.
o (3) Extra Spectrum A6030 Servos.
o (1) Extra Dave Brown 5" aluminum parabolic spinner.
o (1) new uncut engine cowl.
o (1) used cowl cut for the DLE55RA. It got damaged due to lose cowl bolts (my fault). I still fly it with the used one.
I would prefer local pick up or will travel a reasonable distance to deliver.
#2
I’m interested in the airframe with gear. I have gear and I’m willing to pay $1,200.00 plus shipping. If using Greyhound it will not cost that much.
‘Please call me (Michael) at (408) 504-6826 PST
‘Please call me (Michael) at (408) 504-6826 PST