Arms for Throttle and Choke for a Walbro Carb
#1
Thread Starter
My Feedback: (12)
Arms for Throttle and Choke for a Walbro Carb
You will no longer have to figure out where to put the manual control rod sticking out side to choke your engine for starting. Here is the solution to use a servo for Choking or Killing the motor. Over 100 have now been sold, what a record!!!
These CNC Throttle and Choke arms are easy to install on the brass arms on your Walbro Carb! . The longest one is 3/4" tall for the throttle and the one for the choke is 3/8" tall. This way they pass over the top of each other when installed with no interference. Now you can control your choke from your transmitter and don't have to reach around the engine when running, much safer! 100's sold!
I sell them in pairs for $19.95 +$ 1.00 shipping. These arms are now CNC machine and in Silver color. They come with one set screw each!
I do not ship outside the US or other countries. I no longer take Money Orders but will take personal checks! Send a personal check if you do not have a Pay Pal Account! My mailing address : George Jenkins, 2012 Old Arbor Court, Sarasota, Fl. 34232
NOTE, PLEASE READ ALL OF THIS: Please give me your name, mailing address & email to help me keep track of your order by typing in the item you are buying in the "Detail" section along with your mailing address in your Pay Pal purchase.
NOTE: RC Universe and Pay Pal are NOT connected so when you tell me what you want to buy you STILL need to write it in the Pay Pal detail section so I don't have to chase it back on forth.
These CNC Throttle and Choke arms are easy to install on the brass arms on your Walbro Carb! . The longest one is 3/4" tall for the throttle and the one for the choke is 3/8" tall. This way they pass over the top of each other when installed with no interference. Now you can control your choke from your transmitter and don't have to reach around the engine when running, much safer! 100's sold!
I sell them in pairs for $19.95 +$ 1.00 shipping. These arms are now CNC machine and in Silver color. They come with one set screw each!
I do not ship outside the US or other countries. I no longer take Money Orders but will take personal checks! Send a personal check if you do not have a Pay Pal Account! My mailing address : George Jenkins, 2012 Old Arbor Court, Sarasota, Fl. 34232
NOTE, PLEASE READ ALL OF THIS: Please give me your name, mailing address & email to help me keep track of your order by typing in the item you are buying in the "Detail" section along with your mailing address in your Pay Pal purchase.
NOTE: RC Universe and Pay Pal are NOT connected so when you tell me what you want to buy you STILL need to write it in the Pay Pal detail section so I don't have to chase it back on forth.
#3
Join Date: Nov 2017
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Please send a payapl request to [email protected]
deligery to
6411 lakeshore dr
margate fl 33063
1 pair
deligery to
6411 lakeshore dr
margate fl 33063
1 pair