2 new K180 G2 Pumps running when batteries installed but jet is off.
#1
Thread Starter
My Feedback: (58)
Join Date: Dec 2009
Location: peterborough, ON, CANADA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
2 new K180 G2 Pumps running when batteries installed but jet is off.
2 new K180 G2 Pumps running when batteries installed but jet is off.
just installed the twins in a jet, pretty sure the wiring connections are correct ( but you never know)
as soon as I plug a Life battery into either turbine the pump goes on!!!!!
am I missing something?
done this setup several times with other brands, this is a first for me..
the radio is learned to the turbines ( no pump/ Life battery installed for setup)
anyone.. suggestions....
Thanks
just installed the twins in a jet, pretty sure the wiring connections are correct ( but you never know)
as soon as I plug a Life battery into either turbine the pump goes on!!!!!
am I missing something?
done this setup several times with other brands, this is a first for me..
the radio is learned to the turbines ( no pump/ Life battery installed for setup)
anyone.. suggestions....
Thanks
#2
My Feedback: (53)
2 new K180 G2 Pumps running when batteries installed but jet is off.
just installed the twins in a jet, pretty sure the wiring connections are correct ( but you never know)
as soon as I plug a Life battery into either turbine the pump goes on!!!!!
am I missing something?
done this setup several times with other brands, this is a first for me..
the radio is learned to the turbines ( no pump/ Life battery installed for setup)
anyone.. suggestions....
Thanks
just installed the twins in a jet, pretty sure the wiring connections are correct ( but you never know)
as soon as I plug a Life battery into either turbine the pump goes on!!!!!
am I missing something?
done this setup several times with other brands, this is a first for me..
the radio is learned to the turbines ( no pump/ Life battery installed for setup)
anyone.. suggestions....
Thanks
#3
With the original xicoy ecu, pumps could end up running uncontrollably if the ecu was damaged (I think a mosfet could fail closed after overheating).
Not sure about the kingtech ecu... odds are connections are incorrect though.
Not sure about the kingtech ecu... odds are connections are incorrect though.
#4
My Feedback: (81)
fuel pump
With out any hesitation, your wiring is incorrect, your battery lead is going to the pump and pump lead is going to the battery ( ask me how do I know). Look at the ecu drawing (on side of ecu) ,
follow pump + red wire at ecu to pump + red wire, then pump - black wire at ecu to pump - black wire, do the same for the battery. You will find two wires have been switched. I hope this
will resolve your problem, it did mine.
Johnny
follow pump + red wire at ecu to pump + red wire, then pump - black wire at ecu to pump - black wire, do the same for the battery. You will find two wires have been switched. I hope this
will resolve your problem, it did mine.
Johnny
#5
My Feedback: (48)
For the wiring harness that connects the pump to the ECU: make sure that the MPX connector with 4 wires is connected to the ECU and the one with 2 wires is connected to the pump. A friend had his reversed and it did exactly what you described.
By the way there's a note in your manual warning you about this.
By the way there's a note in your manual warning you about this.