NGH60cc FSI inline Gas engine for 75-90" P51, Typhoon, Spitfire, Hawk P40 etc
08-07-2020, 04:38 AM
#1
Senior Member
Thread Starter
NGH60cc FSI inline Gas engine for 75-90" P51, Typhoon, Spitfire, Hawk P40 etc
24/7 Technical support and service by Whatsapp 00610433000015 Team Austars
60CC INLINE GAS ENGINE MADE BY NGH TEAM. QC & PERFORMANCE APPROVED.
IDEAL ENGINE TO FIT 75"-90" P51, SPITFIRE,HAWK, P40, or twin DC3 (140")
Modellers can purchase from your local dealer or us if no importer from your country
$999 USD plus freight around $100-190 USD to worldwide
GF60i2 Linear double cylinder four-stroke gasoline engine
Displacement: 59.82cc
Bore: 29.4m
RPM Range: 1200-8000rpm
Output: 6.3HP/8000rpm
Engine Weight: 2100g
CDI Weight:130g
Ignition Battery: DC4.8V-8.4V 1000mAh
Suggested Props: 20×8-10, 22×8-10, 23×8
Requires: 2-cycle oi1, unleaded gasoline
Ratio of lubricating capacity: Gas
i1 =35:1
Our Paypal address
[email protected]
whatsapp: 00610433000015
60CC INLINE GAS ENGINE MADE BY NGH TEAM. QC & PERFORMANCE APPROVED.
IDEAL ENGINE TO FIT 75"-90" P51, SPITFIRE,HAWK, P40, or twin DC3 (140")
Modellers can purchase from your local dealer or us if no importer from your country
$999 USD plus freight around $100-190 USD to worldwide
GF60i2 Linear double cylinder four-stroke gasoline engine
Displacement: 59.82cc
Bore: 29.4m
RPM Range: 1200-8000rpm
Output: 6.3HP/8000rpm
Engine Weight: 2100g
CDI Weight:130g
Ignition Battery: DC4.8V-8.4V 1000mAh
Suggested Props: 20×8-10, 22×8-10, 23×8
Requires: 2-cycle oi1, unleaded gasoline
Ratio of lubricating capacity: Gas
i1 =35:1Our Paypal address
[email protected]
whatsapp: 00610433000015
