1/3 Scale PUP / Modified to look like a 1 1/2 Strutter RTF add RX
01-07-2023, 01:49 AM
#1
Thread Starter
My Feedback: (48)
Join Date: Oct 2011
Location: Lynchburg VA
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
1/3 Scale PUP / Modified to look like a 1 1/2 Strutter RTF add RX
SORRY CAN NOT SHIP GREAT MODEL / Flys like a Trainer
HAS 9 FLIGHTS IS ELECTRIC STARTING TO THIN THE FLEET > It Can be Purchased as RTF
This is a 1/3 Scale pup built from a Balsa USA 1/3 scale Kit > Made to look like a 1 1/2 strutter >ARF> AIR FRAME > FIREWALL IN THE STOCK LOCATION has 5 R&D metal gear servos , pull , pull on ELEVATOR and Rudder , THE RUDDER AND HORZ STAB CAN BE REMOVED FROM THIS MODEL >Covered with Oretex > , Model is 32 lbs > also made 2 ply ribs that slide on the top center section >THEY CAN BE REMOVED JUST SLIDE OFF , after U check the CG
Firewall Not Cut > Cowl has a trap door that will close to install the batterys
HAS 9 FLIGHTS IS ELECTRIC STARTING TO THIN THE FLEET > It Can be Purchased as RTF
This is a 1/3 Scale pup built from a Balsa USA 1/3 scale Kit > Made to look like a 1 1/2 strutter >ARF> AIR FRAME > FIREWALL IN THE STOCK LOCATION has 5 R&D metal gear servos , pull , pull on ELEVATOR and Rudder , THE RUDDER AND HORZ STAB CAN BE REMOVED FROM THIS MODEL >Covered with Oretex > , Model is 32 lbs > also made 2 ply ribs that slide on the top center section >THEY CAN BE REMOVED JUST SLIDE OFF , after U check the CG
Firewall Not Cut > Cowl has a trap door that will close to install the batterys
