Top-rc F-4
#26
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Thanks very much for those helpful comments. I m going with inverting the tanks for now. Its not ideal but I d feel happier flying that way and will use a brass tube section in the tygon pick up line to keep it from twisting. If the model flies nice, then as I said it will deserve some better custom tanks, access is easy to swap out the tanks at a later date. I m not impressed with the manufacturing quality of the glass fibre tanks as supplied, and can see long term problems, in partcular the seams and glued joints.
I m using a MAP bubble trap for twin tanks, so each tank has a direct feed to the trap.
I m using a MAP bubble trap for twin tanks, so each tank has a direct feed to the trap.
#27
![](/forum/images/badges/premium_member.png)
My Feedback: (54)
![Default](images/icons/icon1.gif)
Off of saddle tanks, you always need a T with equal lengths of fuel line to the center tank or the UAT.
If you don’t believe me, you can do an experiment on the bench with the tanks. Use your 5 gallon fuel can and pump to suck the fuel out of the UAT engine out line to the engine fuel pump. Even with equal lines, elevate one tank when filling. One tank should fill faster than the other, and once pump pressure is off, it should siphon from high tank to lower tank and into the overflow tank.
Best wishes!
#28
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Yes I do have some concerns as you have observed but this set up was suggested to me by someone who should know what they are talking about. I had planned to use a Tee with a single fuel feed to UAT fuel inlet (its worked well on my F16). I will test the set up first as you suggest to see how it behaves, and change it if no good. The tanks need to fill and drain equally in simulated conditions to pass the first test. All lines feeding the UAT will be equal length. Thanks very much for the heads up.
Last edited by Edhamp; 02-15-2024 at 09:04 AM.
#31
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
The saddle tanks fitted inverted. It did need about a 1/4" wood removing from the former that the bottom of the tank sits on, which I re-enforced with a ply doubler just in case. There is just enough room for the top engine cover to clear the top of the tank at the front. The tank is secured with an aluminium L bracketts attached using hysol.
You can also see how much forward the engine can be moved and the stainless steel extension piece I made to the thrust pipe which makes use of the existing nut and bolt screw fixing holes on the bell housing end and is pop riveted at the other end. This mod should save quite a bit of nose weight with minimal effect on performance but can be reversed easily if required.
You can also see how much forward the engine can be moved and the stainless steel extension piece I made to the thrust pipe which makes use of the existing nut and bolt screw fixing holes on the bell housing end and is pop riveted at the other end. This mod should save quite a bit of nose weight with minimal effect on performance but can be reversed easily if required.
#33
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Thanks for your tank plumbing suggestions. I did some tests today and the MAP dual inlet UAT that was reccomeneded worked well as a bubble trap and header tank combined. In my set up , with one tank empty, fuel was still being drawn from the other tank into the UAT rather than air from the empty tank.
With the engine and tanks fitted, I can work towards final installation. I fitted some Unilight afterburner lights (the model comes with an arrestor hook but I ve left this off for now). A Phantom withpout afternurner lights just is not right!
My model did not come with the nose battery cradle shown in the manual. I do not know if this is a later change or not. I make my own solid battery mounting tray in the nose cone for the turbine battery, using 3s 3500mah on this one, the radio and gear batteries are as forward as possible in the nose. To ensure a secure fit, I attached the nose cone to the nose with an additional wing type nut and bolt arrangement . Coupled with the factory fitted locking system and pin which is well thought out, the heavy nose , which also carries some lead to balance the model, is properly secured. Also it a quick job to put together in the field without any tools.
With the engine and tanks fitted, I can work towards final installation. I fitted some Unilight afterburner lights (the model comes with an arrestor hook but I ve left this off for now). A Phantom withpout afternurner lights just is not right!
My model did not come with the nose battery cradle shown in the manual. I do not know if this is a later change or not. I make my own solid battery mounting tray in the nose cone for the turbine battery, using 3s 3500mah on this one, the radio and gear batteries are as forward as possible in the nose. To ensure a secure fit, I attached the nose cone to the nose with an additional wing type nut and bolt arrangement . Coupled with the factory fitted locking system and pin which is well thought out, the heavy nose , which also carries some lead to balance the model, is properly secured. Also it a quick job to put together in the field without any tools.
Last edited by Edhamp; 02-19-2024 at 02:00 PM.
#34
![](/forum/images/badges/premium_member.png)
My Feedback: (54)
![Default](images/icons/icon1.gif)
Afternoon Ed,
I’m glad that you did a fuel tank test. Did you happen to take any pictures of it? How it all connected together? To help figure out why we had the siphoning issue. It’s been a few years ago, and I think it was an interico dual UAT. But truly don’t remember. I just remember T fittings fixed the problem.
Thank you Ed for sharing your experiences and findings!
Dan
I’m glad that you did a fuel tank test. Did you happen to take any pictures of it? How it all connected together? To help figure out why we had the siphoning issue. It’s been a few years ago, and I think it was an interico dual UAT. But truly don’t remember. I just remember T fittings fixed the problem.
Thank you Ed for sharing your experiences and findings!
Dan
#35
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Some pictures of the assembled model. Still some installation to do internally and the main legs need some shims to correct the angle, but most items in place if not connected yet. Really that is about all I have to add to this thread. Final balanced model weight, dry without the drop tanks is 17.8kg which I am very pleased with. I have a suspicion the factory cg (358mm from leading edge) stated in the manual, which is just about the centre of the wing tube, may be a bit nose heavy (the tanks as located result in virtually zero cg shift full or empty). I balanced gear down and no fuel. The control throws suggested in the manual seem a reasonable starting point. I suspect that elevator will be very effective.
Anyone who has flown this model would be great if you could chip in with thoughts on cg and your set-up.
Overall,subject to flying I am really pleased with this model. It looks fantastic and as good as if not better than many costing twice as much. Replacing the current gear drive with Electrons looks an easy swap if proves necessary and my only real complaint is the rubbish manual and poor fuel tanks design/quality.
Ed
Anyone who has flown this model would be great if you could chip in with thoughts on cg and your set-up.
Overall,subject to flying I am really pleased with this model. It looks fantastic and as good as if not better than many costing twice as much. Replacing the current gear drive with Electrons looks an easy swap if proves necessary and my only real complaint is the rubbish manual and poor fuel tanks design/quality.
Ed
Last edited by Edhamp; 02-19-2024 at 01:26 PM.
#36
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Afternoon Ed,
I’m glad that you did a fuel tank test. Did you happen to take any pictures of it? How it all connected together? To help figure out why we had the siphoning issue. It’s been a few years ago, and I think it was an interico dual UAT. But truly don’t remember. I just remember T fittings fixed the problem.
Thank you Ed for sharing your experiences and findings!
Dan
I’m glad that you did a fuel tank test. Did you happen to take any pictures of it? How it all connected together? To help figure out why we had the siphoning issue. It’s been a few years ago, and I think it was an interico dual UAT. But truly don’t remember. I just remember T fittings fixed the problem.
Thank you Ed for sharing your experiences and findings!
Dan
The following users liked this post:
tp777fo (02-19-2024)
The following users liked this post:
yeahbaby (05-09-2024)
#45
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Found another video of this thing flying, much better display than the earlier ones I seen. Looks to fly well and nice landing, certainly able to fly slow and tight with the P47s in the circuit at the Prowing show in Germany.
#47
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
Judging by the lack of input into this thread I wonder just how many there are out there. Certainly TopRC F4 seems more popular in Europe looking at various forums, videos and the many dealers that carry them. A dealer in Italy had been advertising a V2 version for some time. He said they had modified the rudder set up and UC mounting geometry but was not specific. I had no trouble fitting my UC so I am hoping it is a V2. On one you tube video mentioned earlier the wheels are facing outboard, on another it looks like the owner opted to fit Electrons, neither of which are a good look scale wise even though Electrons are generally rock solid.
Last edited by Edhamp; 05-10-2024 at 07:11 AM.
#48
![Default](images/icons/icon1.gif)
Well after several months of putting off the maiden it flew. Hot day on our "uphill" runway it got off a little slow but no bad habits. Was a little pitchy and the SF 16 calmed it when I turned it on. I was worried about fuel so I landed about 5 min.(as it turned out I only used 1/2 my fuel) Way too early and ran off the end of the rwy and pulled the blind nuts thru the China ply. Nothing major and should be fixed soon. It flew well and I was pleased. I'll add a little nose weight and try again after it cools down or I find a longer rwy.