Rovan 1/5 scale 36cc engine
#1
Junior Member
Thread Starter
Join Date: Jul 2024
Location: Houston Tx
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rovan 1/5 scale 36cc engine
I just bought a used Rovan with a 36cc engine. It's and older model (not sure how old). When I try pull starting it, about second or third pull it will try and start, but kicks back and breaks the pull starter. It seems as if it has alot of compression. I'm on my 3rd pull starter and lost at what to try next. Anyone else have or had this problem? Thanks in advance for any help with this issue.
#2
Does the fly wheel match pull start pawls
Does the flywheel match pull starter teeth or pawls? Sometimes folks buy lightened aftermarket flywheels and the pull starter teeth don't match up to the flywheel or sometimes they just don't buy the correct one for that motor compression, i.e. regular duty vs heavy duty.
Last edited by Tbone4life; 08-12-2024 at 07:42 AM. Reason: added more explanation.
The following users liked this post:
Tbone4life (08-14-2024)