GJC Aerojet F15C Eagle Build
#51
![](/forum/images/badges/premium_member.png)
![Default](images/icons/icon1.gif)
very happy with how it flys at 160mm I fly from low cut grass and only have a 120 turbine in mine and it takes off in about 300 feet lands nice ,,still getting it dialed in ,Im sure I can slow it down a bit more on landings
The following users liked this post:
grbaker (08-03-2023)
#52
![Default](images/icons/icon1.gif)
Thanks,
Tone
#54
![](/forum/images/badges/premium_vendor.png)
My Feedback: (11)
![Default](images/icons/icon1.gif)
Getting ready to maiden.
30 pounds ZFW on the button.
Speed board geometry is goofy, won't always pop out. Thats the only thing I've found so far. Should be flying this weekend unless it gets as windy as they indicate it might with a storm off shore.
I ended up going with a Swiwin 140. Radio is a Powerbox Core with 2x 26D receivers, a Pioneer and iSat gyro and VSpeak for the turbine telemetry and an AG63 braking gyro.
30 pounds ZFW on the button.
Speed board geometry is goofy, won't always pop out. Thats the only thing I've found so far. Should be flying this weekend unless it gets as windy as they indicate it might with a storm off shore.
I ended up going with a Swiwin 140. Radio is a Powerbox Core with 2x 26D receivers, a Pioneer and iSat gyro and VSpeak for the turbine telemetry and an AG63 braking gyro.