bowlman

2S7 "Pion

https://cults3d.com/en/3d-model/various/2s7-pion
https://en.wikipedia.org/wiki/2S7_Pion

Thanks
Jimmy

bowlman

M24 Chaffee

https://cults3d.com/en/3d-model/various/m24-chaffee-rc_3d_tanks
https://en.wikipedia.org/wiki/M24_Chaffee
Thanks
Jimmy

bowlman

CV9040C

https://cults3d.com/en/3d-model/various/cv9040c
https://en.wikipedia.org/wiki/Combat_Vehicle_90
Thanks
Jimmy

bowlman

CV90120

https://cults3d.com/en/3d-model/various/cv90120-rc_3d_tanks?fbclid=IwZXh0bgNhZW0CMTEAAR0V3uAPAZ5zb LPVkVvihWzDYAj0jHFypP-4RsznA0IRP2QSqoSAHhHAwUs_aem_AXQhxvra9WDKjTiBNhkic aMxHxbdddCKF5KyGd_zQGq6BFsHS-asuCvXtpkzewEpL3XgroL0gdMW-uShAZZmM8Fq

https://tanks-encyclopedia.com/modern/swedish/cv90120/
Thanks
Jimmy

bowlman

1/16 compatible K2 Blackpanther turret

https://cults3d.com/en/3d-model/art/...MxdJ1grvih5uXb
Thanks
Jimmy

bowlman

Type 95 Ha-Go

https://en.wikipedia.org/wiki/Type_95_Ha-Go_light_tank

Thanks
Jimmy

bowlman

MT-LB

https://cults3d.com/en/3d-model/various/mt-lb

https://en.wikipedia.org/wiki/MT-LB
Thanks
Jimmy

bowlman

https://cults3d.com/en/3d-model/various/vt1-2

VT1-2

https://www.youtube.com/watch?v=e82xD2xcagY



Thanks
Jimmy

bowlman

Kranvagn

https://cults3d.com/en/3d-model/various/kranvagn

https://en.wikipedia.org/wiki/Emil_(tank)
Thanks
Jimmy

bowlman

Challenger 2 AFU

https://cults3d.com/en/3d-model/various/challenger-2-afu

https://en.wikipedia.org/wiki/Challenger_2

Thanks
Jimmy

bowlman

For them that have the HL Challenger 2 you can print the cage and its mounts and add it to your tank

bowlman

https://cults3d.com/en/3d-model/game...pour-tank-jeep
https://cults3d.com/en/3d-model/game...res-tank-us-uk
https://cults3d.com/en/3d-model/game...6-1-16-et-1-18
https://cults3d.com/en/3d-model/vari...tank-wpl-truck

bowlman

M48A1 Patton

https://cults3d.com/en/3d-model/various/m48-patton
https://en.wikipedia.org/wiki/M48_Patton
https://rc3dtanks.site/detail.html#m48
Thanks
Jimmy

bowlman

Looking at the detail page the back of the tank looks like you could print the M60 back end and the engine deck top to make a M48A2 or an A3 ill have to look more to see if the only difference is just the front of the M48 from a M60 to make a M48A5 they look close I think the hull tub is the same shape other then the front the build looks the same as the M60.
Thanks
Jimmy

bowlman

tankme

Since the M60 was already in the models he designed, a lot of us requested the original M48 as you are correct that the upgraded M48 uses the M60 engine deck. I've printed Inkor's M60 and the deck can easily be removed, but I'm not sure what changes would have to happen to adapt it to make a later M48 model. I'm sure some smart slicer cutting and pasting could adapt the M60 rear end and upper deck. I have plans to print the M48 after I finish printing my Warprints Cromwell so I can compare the two, but it will probably be a few weeks before I get to that point.

bowlman

I have printed the M60A3 just printing the tracks now and can print the M48 hull and re print the M60 rear and see if it fits and the top rear deck .
I was also one requesting the M48 I for got there was two versions of the rear .
Thanks
Jimmy

tankme

Yeah, with the combo of all the M60/M48 turrets and both rear ends, I think we can cobble together whatever version of the M48 or M60 we want to build now except the M60A2 which DKLM RC has a conversion kit for the TongDE.

bowlman

I just got there M60 turret and detail set for my TongDE M60A3 Tank looking for there plastic tracks did not see any tracks on Richards site or anyone else's .
Thanks
Jimmy

tankme

Contact Richard directly about the tracks. I bought a set from him not too long ago and they weren't listed on his site. Motion RC does carry the plastic tracks, but they seem to be sold out at the moment.

bowlman

I got the M60 from MotionRC and asked for a email when in stock last month messaged Rich Johnson last night from here just waiting for his reply .
Thanks
jimmy

Fsttanks

Rich is good people! Buy with confidence he is definitely trustworthy. I buy from him routinely and have never been disappointed in his product or service. His custom M60 accessories are all top notch products.

bowlman

Hi Fsttank
I got his M60 accessories kit a few weeks ago on ebay for the printed M60 I did .
Thanks
Jimmy

bowlman

Just printed the M60 rear section and the M48 section 5 they wont line up

tankme

Inkor was on the Discord server today saying he didn't think it would and that the M48 had slightly different dimensions than the M60.