Welcome to Club SAITO !
10-18-2024, 07:45 AM
10-18-2024, 08:51 AM
10-18-2024, 10:00 AM
My Feedback: (27)
Lonnie
Here is a pic of a NIB one I have. Text me what your friend has and wants for his.
N1EDM
A couple of us will be on 20 meters today. Care to join us?
Pete
10-18-2024, 10:22 AM
Quite a bit wrong with that “Special”. Intake tube, carb and backplate are wrong .
A few years ago there were a few 45 Special cases sold on eBay . Could be the case here (?)
A few years ago there were a few 45 Special cases sold on eBay . Could be the case here (?)
10-18-2024, 10:44 AM
10-18-2024, 06:57 PM
My Feedback: (1)
Duds, my brother moved to Florida last year. about 100 miles from Daytona. well yesterday and today I tried and tried to call him to make sure he got out. NO answer. I figured the Towers were blown down. he called me about 9pm tonight. said he road it out, said as far as he can see there is 9 inches of water, but half a mile away there is 16ft of it. and, the Gater in the pond behind his hours is missing. said he had to drive to Tampa just to call me and his daughter.
shoo
shoo
10-19-2024, 12:18 PM
Junior Member
Join Date: Jun 2020
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys,
My club president was able to get the prop drive off, and I found a new connecting rod, but I also need a new crankshaft the rod journal (pin) is worn as well. I cannot find the correct crank anywhere. Does someone know the part number for it?
I can't post pictures yet, otherwise I would.
My club president was able to get the prop drive off, and I found a new connecting rod, but I also need a new crankshaft the rod journal (pin) is worn as well. I cannot find the correct crank anywhere. Does someone know the part number for it?
I can't post pictures yet, otherwise I would.
10-19-2024, 12:28 PM
Senior Member
T, your engine code is D. It appears all the engines, 40 through 56 have a 19mm stroke.
https://sceptreflight.com/Model%20En...-45%20MK2.html
This should be your crank shaft: https://www.horizonhobby.com/product.../SAI5623A.html
https://sceptreflight.com/Model%20En...-45%20MK2.html
This should be your crank shaft: https://www.horizonhobby.com/product.../SAI5623A.html
Last edited by 1200SportsterRider; 10-19-2024 at 12:34 PM. Reason: Add content
Yesterday, 01:56 AM
Senior Member
This Stik is being released in early November by OSMW
They call it the Raider, it looks perfect for a Saito 62.
, I took notice of the lightening slots in the shear webs, pretty cool eh.
They call it the Raider, it looks perfect for a Saito 62.
, I took notice of the lightening slots in the shear webs, pretty cool eh.
Yesterday, 02:26 PM
My Feedback: (12)
Hey Charlie. A little late, but I am trying to find any build threads on the Cloud Dancer 60. Yours is one of the few posts that even mention it. Any help here?
Yesterday, 03:36 PM
