CC Phx 60
11-17-2003, 07:54 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Tsuen WanNew Territories, HONG KONG
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
CC Phx 60
I got a Phx 60 from aircraft-world for my logo10 with a B50-15L motor. I followed everything that what was written on the manual.
Everything seemed okay until I tried to hover the heli.
I noticed that the motor won't run smoothly as it should. The motor would jerk after putting in some throttle. It only worked after throttling up and down for 2 to 3 times. [
] I've already set the esc to "very soft start" but it's just same. Gear mesh are all okay.
Anybody experienced this? []
Everything seemed okay until I tried to hover the heli.
I noticed that the motor won't run smoothly as it should. The motor would jerk after putting in some throttle. It only worked after throttling up and down for 2 to 3 times. [
] I've already set the esc to "very soft start" but it's just same. Gear mesh are all okay.Anybody experienced this? [
]
11-17-2003, 10:15 AM
#2
Senior Member
Join Date: Sep 2002
Location: Finchingfield, Essex, UNITED KINGDOM
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
RE: CC Phx 60
Can you list all your settings. I presume you're using it in govenor mode?
BTW, you know you can talk to Shawn Palmer (who works at CC) directly in the http://www.rcgroups.com/forums/forum...s=&forumid=168 forum.
Cliff
BTW, you know you can talk to Shawn Palmer (who works at CC) directly in the http://www.rcgroups.com/forums/forum...s=&forumid=168 forum.
Cliff
11-19-2003, 04:13 AM
#4
Junior Member
Join Date: Apr 2003
Location: Hong Kong, HONG KONG
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: CC Phx 60
It's nice to hear that your LOGO is almost ready to fly.
But I wonder why you didn't buy stuff from cyberheli insted of buying from outside.
Any problem did you have?
BTW, Do you know any nice place to fly heli in Sha Tin area?
But I wonder why you didn't buy stuff from cyberheli insted of buying from outside.
Any problem did you have?
BTW, Do you know any nice place to fly heli in Sha Tin area?
11-19-2003, 04:25 AM
#5
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Tsuen WanNew Territories, HONG KONG
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
RE: CC Phx 60
hey reefer, how are you? I got the kit from cyberheli/cyberkopter and some of the stuff. I've settled with aircraft-world for the motor/esc since it's cheaper.
Anyway, The problem I had with the CC phx60 just got worst... I've posted it in the link which Wright Flyer provided and Shawn recommended to set the Gov mode to High RPM setting.. the ESC became hot... motor is still jerking.. so I set it back to the Low RPM setting as the "Phx60 user guide" recommends BUT the ESC smoked.. both caps balloned.. and a couple of FETS toasted.
I should have bought the Hacker or the Kontronik!
Anyway, The problem I had with the CC phx60 just got worst... I've posted it in the link which Wright Flyer provided and Shawn recommended to set the Gov mode to High RPM setting.. the ESC became hot... motor is still jerking.. so I set it back to the Low RPM setting as the "Phx60 user guide" recommends BUT the ESC smoked.. both caps balloned.. and a couple of FETS toasted.
I should have bought the Hacker or the Kontronik!
11-19-2003, 04:50 AM
#6
Junior Member
Join Date: Apr 2003
Location: Hong Kong, HONG KONG
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: CC Phx 60
Sorry to hear about your CC60 problem.
I'm not quite happy about my CC10 w razor heli V2. either.
Have you sent a mail to aircraft-world about that?
I'm considering 2nd heli and stand between eolo or logo as you did.
Found a dealer who carry logo part at island side but they said " No eolo in stock and some of parts are in stock..." ???????
I think I will buy either logo or eolo if I can find nice place to fly that BIG heli.(compare with my hornet.)
Hope you can solve your ESC problem soon.
I'm not quite happy about my CC10 w razor heli V2. either.
Have you sent a mail to aircraft-world about that?
I'm considering 2nd heli and stand between eolo or logo as you did.
Found a dealer who carry logo part at island side but they said " No eolo in stock and some of parts are in stock..." ???????
I think I will buy either logo or eolo if I can find nice place to fly that BIG heli.(compare with my hornet.
)Hope you can solve your ESC problem soon.
