HB Dragonfly Swashplate DIY
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Columbia Heights, MN
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Hi All,
I know you can get a machined swash online, but this is just for the DIY'ers.
You know when you've built it yourself, you fly more carefully![Wink](images/smilies/wink.gif)
I'm just starting out learning CNC machining and drew up this swashplate diagram I thought someone may find useful.
Its just in pencil right now, but hopefully someone more experience can take advantage of it.
It's all in SI metric. :-) or :-(
I'm slowly working on converting this to vector format for easy machining.
You can get the 3mm balls at helihobby.com.
Please let me know if some of my measurements are off.
-Dan
I know you can get a machined swash online, but this is just for the DIY'ers.
You know when you've built it yourself, you fly more carefully
![Wink](images/smilies/wink.gif)
I'm just starting out learning CNC machining and drew up this swashplate diagram I thought someone may find useful.
Its just in pencil right now, but hopefully someone more experience can take advantage of it.
It's all in SI metric. :-) or :-(
I'm slowly working on converting this to vector format for easy machining.
You can get the 3mm balls at helihobby.com.
Please let me know if some of my measurements are off.
-Dan