malidfa

Can i use thse bevel gears in my savage????
The factory ones r 10 for the small gears & 20 teeth for the large one,the ones in the link r 10 & 18
http://www2.towerhobbies.com/cgi-bin...?&I=LXBZC7&P=7

Rex2342

I would stick with what came stock.I've heard stories of guys trying the Ofna ones and tearing all the teeth off of them in an hour.The stock HPI ones are hardened and should last a very long time if properly cared for and set up.Ofna does make hardened ones but I don't think those are them.

malidfa

Ok no worries its just that tower is out of stock on the hpi ones & they will be for awhile.i also herd that hpi is not going to make them anymore please tell me thats not true

malidfa

What about these ones there 10 & 20 teeth just like the hpi ones
http://www2.towerhobbies.com/cgi-bin...?&I=LXCWX7&P=0

Rex2342

I think those are the hardend ones from Ofna and I think they will work but i'd go with the stock ones just to be sure.It's alot of work tearing the truck apart and putting it back together just to have to do it all over agin because the diff blew.I see no reason why HPI would stop selling the diff gears.They have 2 versions of the truck out that use the same gears so I think they'll keep selling them.

malidfa

OK cool thanks rex
Ill stick with the originals,i will just wait until they r back in stock

bbentley40

You may have to do like I did.. hit up ebay and see if you can find the complete diff. I got one for like 30 bucks shipped so now my truck is running again plus I have spare parts incase I need them.