i need a 15x12 3 blade prop
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Feb 2003
Location: halifax Nova scotia,
NS, CANADA
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
i need a 15x12 3 blade prop
i looked on tower hobbies website and greathobbies and they dont have any 15x12 3 blade props
anyone know where i could purchase one
my supertigre 2000 needs a prop [>:]
anyone know where i could purchase one
my supertigre 2000 needs a prop [>:]
#2
Banned
Join Date: Jan 2003
Location: gone,
Posts: 4,923
Likes: 0
Received 0 Likes
on
0 Posts
RE: i need a 15x12 3 blade prop
Yo are probably going tohave to... special order.
I believe APC does special order props.
If it was smaller... you could cut 3 props at the hub and assemble it (8 inch max) using ply disks to rebuilt the hub (its a THICK hub) I've built a 5 blade that way. A 15 inch would rip that method apart.
I believe APC does special order props.
If it was smaller... you could cut 3 props at the hub and assemble it (8 inch max) using ply disks to rebuilt the hub (its a THICK hub) I've built a 5 blade that way. A 15 inch would rip that method apart.
#3
Senior Member
My Feedback: (3)
Join Date: Feb 2002
Location: Macho Grande, KS
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
RE: i need a 15x12 3 blade prop
Might have to go 16x8 or sand down a 16x10
http://www.masterairscrew.com/GoCart...07631959277827
http://www.masterairscrew.com/GoCart...07631959277827
#4
Senior Member
My Feedback: (8)
Join Date: Sep 2003
Location: Las Vegas, NV
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
RE: i need a 15x12 3 blade prop
zinger makes what ya need, that is if wood is ok. part#3158 $30
http://www.zingerpropeller.com/3_bladed_Propeller.htm
John
http://www.zingerpropeller.com/3_bladed_Propeller.htm
John