DA 100 Break in procedure
06-01-2002, 11:07 AM
#1
Member
Thread Starter
My Feedback: (2)
Join Date: Feb 2002
Location: jacksonville, FL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
DA 100 Break in procedure
Just got the motor and it came with no instruction's. What type of oil do you use for break in. Do you run it on the plane for break in and what oil after brek in. What is the r.p.m. range they sent me a mej. 28x10....
Thanks
Thanks
06-01-2002, 05:13 PM
#2
DA 100 Break in procedure
Shoot an email to Dave Johnson at: [email protected]
A couple of the last motors got out without instructions, but we don't know who.
32:1 with Lawnboy Ashless for 5-6 gallons. AmSoil 100:1 after that. No need to run it too rich, just don't set it lean. Break it in in the plane, in the air...and have fun.
A couple of the last motors got out without instructions, but we don't know who.
32:1 with Lawnboy Ashless for 5-6 gallons. AmSoil 100:1 after that. No need to run it too rich, just don't set it lean. Break it in in the plane, in the air...and have fun.
