Banished Outside

Hi All,

I am new to heli's, I got a Feda Dragonfly direct from China, when it came it had a transmitter to pc com lead but no software.
The transmitter is a Zhen Hua PCM-4CH (with a port on the back), I have tried the FMS simulator, but cannot get it working!

I cannot get funding for more software authorised by my financial director (wife).
As anyone had success with this software / tx combination?

If so what settings in FMS?

ps I'm running a 1GHz laptop with XP.

Cheers
Steve

ramanarao

Hi:

I just recd mine from China. The manual is poorly written. Did you fly your heli? Any luck locating sim software? Thanks

Keith Buckner

Here is the link to the SIM software that ships with the FEDA:
http://n.ethz.ch/student/mmoeller/fms/index_e.html


The version that actually ships with the Heli has more features, but this should get you running.

One note, though:
If you are running XP, you'll need to move to a SERIAL connector instead of the Parallel.

ramanarao

Thanks, I will give it a try.

slopper

How do you connect your cabel to a serial port im running xp also and i have a feda and wont to use the programe simulator

Keith Buckner

You buy the serial cable adapter for your model transmitter. There are also USB adapter cables.
I see them both on Ebay all the time.

Rayan

Feda Dragonfly with Shen Hua Transmitter and PC Simulator problem solved... Use the search for Zhen Hua!

MTDV

My Feedback: (58)

Check these post for setting up the FMS with Zhen Hua remote. I've got it worked with Win98, and I am trying to do it with WinXP (Other had successfully set up with XP). Hope this helps.

MTDV

http://www.rcuniverse.com/forum/Feda...1303345/tm.htm
http://www.rcuniverse.com/forum/Zhen...1484260/tm.htm

Botanist

Check the forum, I got my working on Win XP and Win 98. You need ppjoy.

MTDV

My Feedback: (58)

I've got it worked with both Win98 and WinXp. I had problem with WinXP because the serial port was used by my HotSync Manager (Palm software). Therefore, be sure that free serial port before open PPJoy Virtual Port, select Zhen Hua, minimize PPJoy, and then FMS. Select Control in FMS, and select Analog Controls. Calebrate and enjoy. Hope this would help.

MTDV