VMAR Arrow Tiger EMERGENCY NOTICE!!!
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Beaumont,
TX
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
VMAR Arrow Tiger EMERGENCY NOTICE!!!
Unless your instruction booklet has been updated and corrected the CG location is NOT correct per Richmond RC on the Arrow Tiger.
If your booklet says the CG is 80-85MM that is NOT correct.
Just letin' ya' know
Walt
If your booklet says the CG is 80-85MM that is NOT correct.
Just letin' ya' know
Walt
#2
Senior Member
My Feedback: (4)
Join Date: Feb 2002
Location: CA
Posts: 1,166
Likes: 0
Received 0 Likes
on
0 Posts
RE: VMAR Arrow Tiger EMERGENCY NOTICE!!!
ORIGINAL: Q-Ball
Unless your instruction booklet has been updated and corrected the CG location is NOT correct per Richmond RC on the Arrow Tiger.
If your booklet says the CG is 80-85MM that is NOT correct.
Just letin' ya' know
Walt
Unless your instruction booklet has been updated and corrected the CG location is NOT correct per Richmond RC on the Arrow Tiger.
If your booklet says the CG is 80-85MM that is NOT correct.
Just letin' ya' know
Walt
#3
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Beaumont,
TX
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
RE: VMAR Arrow Tiger EMERGENCY NOTICE!!!
Edge,
I wish I could cut and paste the whole letter from VMAR on here but am a bit computer illerate.I have the letter in my saved and was going to mail it to anyone interested.
It amounts to moving the CG 3/4 to 1 inch back which makes a big,big difference.The book was wrong saying 80-85MM so moving the CG back 3/4 of an inch from the 80MM will put it in the park.I still had to add some weight but no where near the original.
Another guy was having a time and did major mods to the plane,like major.He posted about it about the time I was haveing a problem.I posted the correction after talking to VMAR but he disappeared.Somewhere out there is a 1 ton Arrow Tiger.
Thanx
Walt
I wish I could cut and paste the whole letter from VMAR on here but am a bit computer illerate.I have the letter in my saved and was going to mail it to anyone interested.
It amounts to moving the CG 3/4 to 1 inch back which makes a big,big difference.The book was wrong saying 80-85MM so moving the CG back 3/4 of an inch from the 80MM will put it in the park.I still had to add some weight but no where near the original.
Another guy was having a time and did major mods to the plane,like major.He posted about it about the time I was haveing a problem.I posted the correction after talking to VMAR but he disappeared.Somewhere out there is a 1 ton Arrow Tiger.
Thanx
Walt