WTB: SkyLark Titanium Main Shaft
11-21-2003, 09:54 PM
#1
Junior Member
Thread Starter
My Feedback: (18)
Join Date: Nov 2003
Location: charlotte,
NC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
WTB: SkyLark Titanium Main Shaft
i need to buy a skylark titanium main shaft. it can also be the picolo one too. emai: [email protected] or just drop any offer.
I also need the One-Way rotation gear. If you have one let me know or drop an offer. thx.
I also need the One-Way rotation gear. If you have one let me know or drop an offer. thx.
12-02-2003, 09:04 PM
#2
Junior Member
Join Date: Nov 2002
Location: Burbank, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB: SkyLark Titanium Main Shaft
helihobby.com
it is the one for the piccolo FP and will need to be modified.
A flat will need to be milled for the head and the C-clip groove will need to be moved up.
Also make the shaft longer than stock 3-4 mm from the top bearing to the top of the shaft this will make install of after market swash plates work better (have more room to move without hitting the shaft collar).
it is the one for the piccolo FP and will need to be modified.
A flat will need to be milled for the head and the C-clip groove will need to be moved up.
Also make the shaft longer than stock 3-4 mm from the top bearing to the top of the shaft this will make install of after market swash plates work better (have more room to move without hitting the shaft collar).
12-03-2003, 10:08 PM
#3
Junior Member
Thread Starter
My Feedback: (18)
Join Date: Nov 2003
Location: charlotte,
NC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB: SkyLark Titanium Main Shaft
OMG.... thats a lot of work just to go to titanium. i will prolly stick with carbon fiber since its already there and no mod needed. hey btw do you know where i can buy the autorotation thing that allows landing without power? i think that it will help me out alot and much more easier flying. let me know
02-25-2004, 02:55 AM
#4
Member
Join Date: Feb 2004
Location: fountain inn, SC
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB: SkyLark Titanium Main Shaft
i have an aerohawk which im pretty sure is a newer version of the skylark,which hobbylobby and heli hobbies sells a steel shaft for $2-$3
not titanium but better than cf(for a mian shaft anyway)
not titanium but better than cf(for a mian shaft anyway)
