Aerohawk transmitter modified to work with FMS Simulator
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: Eindhoven, NETHERLANDS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I slightly modified the design of Eric Brouwer (http://myweb.absa.co.za/eric.brouwer/interface.htm) and managed to get it to work with the Smartech GWT-4A transmitter. I removed the zener and used the 5 volts inside the transmitter. The white wire is the PPM signal. The red wire is connected to the +5 volts. The third wire is connected to ground. The two wires on the left lead to a switch which I use to disconnect the power of the RF circuit. Just to save battery power when I use the transmitter for simulation.
#2
Senior Member
Join Date: Jan 2004
Location: Earth, SINGAPORE
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Hi
Aerohawk TX is a relabeled model from GWS TX. If you interested, there are sites/forums that teach u how to mod it to have MORE channel. (Just look around and u will find it)
Super-Hornet
Aerohawk TX is a relabeled model from GWS TX. If you interested, there are sites/forums that teach u how to mod it to have MORE channel. (Just look around and u will find it)
Super-Hornet